[Sat May  5 10:32:41 2012] Detection parameters:
  Position = (281.1, 116.0) = 5 34 33.08 21 49 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.6 +/- 31.3
  Background counts = 147.9
  Rate = 0.02 +/- 0.002

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 13.28'
[Sat May  5 10:41:16 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Sat May  5 10:41:16 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Sat May  5 10:41:16 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.07"
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19.csv
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19.csv
[Sat May  5 21:59:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat May  5 21:59:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun May  6 14:30:50 2012] Warning, spatial fit 19 centroid is now closest to src. 81
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:30:51 2012] Source is confused with source 23
[Sun May  6 14:32:01 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Sun May  6 14:32:01 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.07"
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19.csv
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19.csv
[Mon May  7 01:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon May  7 01:40:54 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon May  7 21:59:34 2012] Warning, spatial fit 19 centroid is now closest to src. 83
[Mon May  7 21:59:34 2012] Source 24 is offset by 4.630729 and -7.682499 pixels which is larger than
2 X fitted extent = 5.273977 x 5.273977, not incorporating fit results
[Mon May  7 21:59:34 2012] Spatial fit model total counts = 5272.550000, observed total counts = 5265.000000
[Mon May  7 21:59:34 2012] Offset between fit and detection position for source 24 = 9.410369 pixels
[Mon May  7 21:59:34 2012] Warning, changing simple spatial fit ID from 19 to 64
[Mon May  7 21:59:34 2012] 4068.390000 total counts/ 2728.580000 bgd. counts: snr = 25.649262
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 9.410369 pixels
  Position = (278.2, 107.1) = 5 34 33.97 21 48 23.5
  Extent = 27.4 (27.4-27.4)", rotation angle = 0
  Source counts = 1339.8 +/- 63.8
  Background counts = 2728.6
  Rate = 0.08 +/- 0.004
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major axis lower bound
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:04 2012] Counts = 1339.810000, rescaling region sizes by 2.000000
[Mon May  7 22:01:04 2012] XMMSAS src. selection expression = ellipse(24154.540000, 9265.662000, 3290.160095, 3290.160095, 0.000000, X, Y)
[Mon May  7 22:01:04 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24_src.reg
[Mon May  7 22:01:04 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (89, 0) - (467, 296)
[Mon May  7 22:01:04 2012] XMMSAS bgd. selection expression = annulus(24154.540000, 9265.662000, 10967.200316, 21934.400631, X, Y) && !ellipse(25834.000000, 15951.976974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16550.944946, 23533.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18003.790253, 24147.188202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31321.496857, 23182.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17909.334930, 22397.946045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16699.979706, 26910.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(18175.569321, 27701.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31495.534027, 26230.972015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17678.583679, 25020.637085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31483.697906, 24494.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22147.120117, 17702.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20170.902000, 17880.427800, 1005.184029, 1005.184029, 0.000000, X, Y) && !ellipse(22957.328857, 17613.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26992.338837, 16980.107864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.313800, 16455.768000, 1698.856049, 1698.856049, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(24533.432920, 12505.843800, 1227.000035, 1227.000035, 0.000000, X, Y) && !ellipse(24313.106293, 11431.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.810000, 11454.238000, 1612.856046, 1612.856046, 0.000000, X, Y) && !ellipse(24312.388800, 10738.524000, 3197.768092, 3197.768092, 0.000000, X, Y) && !ellipse(23656.758300, 8938.238000, 2119.672061, 2119.672061, 0.000000, X, Y) && !ellipse(24312.070200, 9780.014000, 1602.856046, 1602.856046, 0.000000, X, Y) && !ellipse(17596.506104, 30496.234100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18252.263824, 30484.589142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17856.312668, 29007.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17323.233231, 28657.047516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18024.402573, 28157.928558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32670.389801, 28028.171967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17198.562347, 27428.724762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31583.635864, 27695.536621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32830.928802, 27317.240082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17499.766000, 27008.278000, 1345.472039, 1345.472039, 0.000000, X, Y) && !ellipse(31576.000000, 26820.176117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32325.336884, 26148.687347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.005310, 25792.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17912.446625, 25786.551971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32544.676819, 24917.141388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31875.439514, 25013.757904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17870.709564, 23704.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.801361, 23786.364410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17873.372559, 23348.685486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32572.424530, 22662.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 22215.256134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32392.015289, 21796.354904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31404.739990, 21711.397949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.869690, 21349.980759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16527.586000, 20553.552000, 1711.448049, 1711.448049, 0.000000, X, Y) && !ellipse(32050.254608, 20300.171555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31639.574000, 20325.765000, 1583.016046, 1583.016046, 0.000000, X, Y) && !ellipse(17366.397369, 20135.899582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19107.090332, 17882.783310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.796814, 17527.017349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19519.032730, 17777.796814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19816.180954, 17296.400177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18656.916000, 16946.642000, 1755.536051, 1755.536051, 0.000000, X, Y) && !ellipse(22223.837189, 16912.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.057020, 17937.332800, 1645.392047, 1645.392047, 0.000000, X, Y) && !ellipse(24553.635000, 15902.216000, 1670.168048, 1670.168048, 0.000000, X, Y) && !ellipse(24233.869598, 15612.935043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(11806.024000, 14354.274000, 2237.656064, 2237.656064, 0.000000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y) && !ellipse(23785.048000, 13209.796000, 775.674422, 775.674422, 0.000000, X, Y) && !ellipse(24236.873800, 13533.128000, 1884.128054, 1884.128054, 0.000000, X, Y) && !ellipse(23797.582000, 12443.820000, 2000.064058, 2000.064058, 0.000000, X, Y) && !ellipse(23540.702515, 11602.181412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.087067, 10656.313286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23442.739899, 10129.232887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.977783, 8478.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.817688, 7735.961601, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 22:01:04 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24.gif
[Mon May  7 23:39:58 2012] Mean detx,y = (14437.96, -351.23) 
[Mon May  7 23:40:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 23:51:21 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 23:51:21 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May  7 23:51:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue May  8 15:47:07 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:07 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue May  8 15:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:14 2012] Using photon index=1.80, rate=0.0843, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src24.arf
[Tue May  8 15:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:14 2012] Updating source flux to 2.1e-12
[Tue May  8 15:47:44 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Tue May  8 15:47:44 2012] Flag c found in src. 24 procflags, skipping spectral fitting