[Sat May  5 10:32:41 2012] Detection parameters:
  Position = (280.9, 128.0) = 5 34 33.12 21 49 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 463.4 +/- 34.8
  Background counts = 165.5
  Rate = 0.03 +/- 0.002

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 12.43'
[Sat May  5 10:41:16 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Sat May  5 10:41:16 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.776
[Sat May  5 10:41:16 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.64"
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src17.ximg exists
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat May  5 21:59:51 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src17 appears to have run properly
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May  5 21:59:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun May  6 14:30:50 2012] Warning, spatial fit 17 centroid is now closest to src. 80
[Sun May  6 14:30:51 2012] Spatial fit model total counts = 5997.160000, observed total counts = 5998.000000
[Sun May  6 14:30:51 2012] Offset between fit and detection position for source 22 = 2.699939 pixels
[Sun May  6 14:30:51 2012] Warning, changing simple spatial fit ID from 17 to 67
[Sun May  6 14:30:51 2012] 5327.700000 total counts/ 4322.080000 bgd. counts: snr = 15.296339
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.699939 pixels
  Position = (282.8, 129.8) = 5 34 32.52 21 50 2.6
  Extent = 25.6 (16.0-51.2)", rotation angle = 0
  Source counts = 1005.6 +/- 73.0
  Background counts = 4322.1
  Rate = 0.06 +/- 0.005
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:30:51 2012] Source is confused with source 20
[Sun May  6 14:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 25.61"
[Sun May  6 14:32:01 2012] source mask rpix=5.9, npix_max = 163, mask sum = 169, frac = 1.036
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 25.61"
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17.csv
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17.csv
[Mon May  7 01:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon May  7 01:40:54 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon May  7 21:59:34 2012] Warning, spatial fit 17 centroid is now closest to src. 76
[Mon May  7 21:59:34 2012] Spatial fit model total counts = 6997.930000, observed total counts = 7003.000000
[Mon May  7 21:59:34 2012] Offset between fit and detection position for source 22 = 2.370317 pixels
[Mon May  7 21:59:34 2012] Warning, changing simple spatial fit ID from 17 to 61
[Mon May  7 21:59:34 2012] 5748.163000 total counts/ 5027.180000 bgd. counts: snr = 10.168638
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.370317 pixels
  Position = (282.8, 132.2) = 5 34 32.54 21 50 12.9
  Extent = 20.2 (15.6-25.6)", rotation angle = 0
  Source counts = 721.0 +/- 75.8
  Background counts = 5027.2
  Rate = 0.05 +/- 0.005
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major axis lower bound
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:03 2012] XMMSAS src. selection expression = ellipse(24552.810000, 11454.238000, 1209.642035, 1209.642035, 0.000000, X, Y)
[Mon May  7 22:01:03 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22_src.reg
[Mon May  7 22:01:03 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (213, 63) - (352, 202)
[Mon May  7 22:01:03 2012] XMMSAS bgd. selection expression = annulus(24552.810000, 11454.238000, 2016.070058, 4032.140116, X, Y) && !ellipse(25834.000000, 15951.976974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(24628.313800, 16455.768000, 1698.856049, 1698.856049, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(24533.432920, 12505.843800, 1227.000035, 1227.000035, 0.000000, X, Y) && !ellipse(24313.106293, 11431.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24312.388800, 10738.524000, 3197.768092, 3197.768092, 0.000000, X, Y) && !ellipse(24154.540000, 9265.662000, 2193.440063, 2193.440063, 0.000000, X, Y) && !ellipse(23656.758300, 8938.238000, 2119.672061, 2119.672061, 0.000000, X, Y) && !ellipse(24312.070200, 9780.014000, 1602.856046, 1602.856046, 0.000000, X, Y) && !ellipse(24553.635000, 15902.216000, 1670.168048, 1670.168048, 0.000000, X, Y) && !ellipse(24233.869598, 15612.935043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y) && !ellipse(23785.048000, 13209.796000, 775.674422, 775.674422, 0.000000, X, Y) && !ellipse(24236.873800, 13533.128000, 1884.128054, 1884.128054, 0.000000, X, Y) && !ellipse(23797.582000, 12443.820000, 2000.064058, 2000.064058, 0.000000, X, Y) && !ellipse(23540.702515, 11602.181412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.087067, 10656.313286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23442.739899, 10129.232887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.977783, 8478.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.817688, 7735.961601, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 22:01:03 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22.gif
[Mon May  7 23:14:12 2012] Mean detx,y = (13072.80, -608.52) 
[Mon May  7 23:14:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 23:14:53 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 23:14:54 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon May  7 23:14:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue May  8 15:47:07 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:07 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue May  8 15:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:14 2012] Using photon index=1.80, rate=0.0454, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src22.arf
[Tue May  8 15:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:14 2012] Updating source flux to 1e-12
[Tue May  8 15:47:44 2012] Flag c found in src. 22 procflags, skipping spectral fitting