[Sat May  5 10:32:40 2012] Detection parameters:
  Position = (264.4, 203.0) = 5 34 38.28 21 55 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 622.9 +/- 40.7
  Background counts = 590.9
  Rate = 0.07 +/- 0.004

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 7.34'
[Sat May  5 10:41:15 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:15 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sat May  5 10:41:15 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.565
[Sat May  5 10:41:15 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.10"
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9.csv
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9.csv
[Sat May  5 21:59:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May  5 21:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May  5 21:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May  5 21:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:50 2012] Spatial fit model total counts = 8195.200000, observed total counts = 5543.000000
[Sun May  6 14:30:50 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 14:30:50 2012] Warning, spatial fit 9 centroid is now closest to src. 66
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:32:01 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sun May  6 14:32:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.565
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.10"
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9.csv
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9.csv
[Mon May  7 01:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May  7 01:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May  7 01:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Mon May  7 01:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:34 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.056621 pixels away
[Mon May  7 21:59:34 2012] Spatial fit model total counts = 4488.960000, observed total counts = 5543.000000
[Mon May  7 21:59:34 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 21:59:34 2012] Spatial fit model total counts = 7810.100000, observed total counts = 5726.000000
[Mon May  7 21:59:34 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 21:59:34 2012] Source 14 is offset by -0.976818 and 8.619705 pixels which is larger than
2 X fitted extent = 1.211048 x 1.211048, not incorporating fit results
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 21:59:34 2012] Source is confused with source 7
[Mon May  7 22:01:02 2012] XMMSAS src. selection expression = ellipse(22957.328857, 17613.548737, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 22:01:02 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14_src.reg
[Mon May  7 22:01:02 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (227, 166) - (302, 241)
[Mon May  7 22:01:02 2012] XMMSAS bgd. selection expression = annulus(22957.328857, 17613.548737, 1087.500000, 2175.000000, X, Y) && !ellipse(25834.000000, 15951.976974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(22147.120117, 17702.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20170.902000, 17880.427800, 1005.184029, 1005.184029, 0.000000, X, Y) && !ellipse(24628.313800, 16455.768000, 1698.856049, 1698.856049, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(22223.837189, 16912.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.057020, 17937.332800, 1645.392047, 1645.392047, 0.000000, X, Y) && !ellipse(24553.635000, 15902.216000, 1670.168048, 1670.168048, 0.000000, X, Y) && !ellipse(24233.869598, 15612.935043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y)
[Mon May  7 22:01:02 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14.gif
[Mon May  7 22:26:50 2012] Mean detx,y = (7111.60, 1173.42) 
[Mon May  7 22:26:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 22:27:32 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 22:27:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May  7 22:27:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May  8 02:09:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 02:09:50 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:06 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:06 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May  8 15:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:13 2012] Using photon index=1.80, rate=0.0682, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src14.arf
[Tue May  8 15:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:13 2012] Updating source flux to 1.2e-12
[Tue May  8 15:47:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting