[Sun Jan 1 03:30:41 2012] Detection parameters: Position = (274.5, 91.3) = 5 34 35.13 21 47 4.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 97.9 +/- 21.1 Background counts = 47.7 Rate = 0.01 +/- 0.003 [Sun Jan 1 03:30:41 2012] Off-axis axis estimate = 15.12' [Sun Jan 1 13:24:20 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting [Sun Jan 1 13:24:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jan 1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 13.99" [Sun Jan 1 13:24:20 2012] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.706 [Sun Jan 1 13:24:20 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 13.99" [Sun Jan 1 23:57:57 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81.ximg exists [Sun Jan 1 23:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81.csv [Sun Jan 1 23:57:57 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81_1.ximg exists [Sun Jan 1 23:57:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81.csv [Sun Jan 1 23:57:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jan 1 23:58:02 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src81.ximg exists [Sun Jan 1 23:58:02 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists [Sun Jan 1 23:58:02 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly [Sun Jan 1 23:58:53 2012] Source 91 is offset by 2.847395 and 6.489853 pixels which is larger than 2 X fitted extent = 1.582837 x 1.582837, not incorporating fit results [Sun Jan 1 23:58:53 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 17.912377 pixels away [Sun Jan 1 23:58:53 2012] Warning, spatial fit 81 centroid is now closest to src. 25 [Sun Jan 1 23:58:53 2012] Vigneting correction estimate = 1.000000 [Sun Jan 1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jan 1 23:58:53 2012] Assessing source extent using major [Sun Jan 1 23:58:53 2012] Source does appear to be extended [Sun Jan 1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jan 1 23:58:53 2012] Source is confused with source 5 [Mon Jan 2 09:16:39 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting [Mon Jan 2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 13.99" [Mon Jan 2 09:16:39 2012] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.706 [Mon Jan 2 09:16:39 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 13.99" [Mon Jan 2 22:43:30 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73.ximg exists [Mon Jan 2 22:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73.csv [Mon Jan 2 22:43:30 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73_1.ximg exists [Mon Jan 2 22:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73.csv [Mon Jan 2 22:43:30 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 2 22:43:34 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src73.ximg exists [Mon Jan 2 22:43:34 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists [Mon Jan 2 22:43:34 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly [Mon Jan 2 22:44:28 2012] Warning, spatial fit 73 centroid is now closest to src. 26 [Mon Jan 2 22:44:28 2012] Vigneting correction estimate = 1.000000 [Mon Jan 2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 2 22:44:28 2012] Assessing source extent using major [Mon Jan 2 22:44:28 2012] Source does appear to be extended [Mon Jan 2 22:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 3 02:39:10 2012] XMMSAS src. selection expression = ellipse(23832.997345, 7896.961250, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jan 3 02:39:10 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91_src.reg [Tue Jan 3 02:39:10 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (237, 54) - (312, 129) [Tue Jan 3 02:39:10 2012] XMMSAS bgd. selection expression = annulus(23832.997345, 7896.961250, 1087.500000, 2175.000000, X, Y) && !ellipse(24510.701800, 10019.168400, 1533.352044, 1533.352044, 0.000000, X, Y) && !ellipse(24315.434753, 10741.930016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.044952, 9344.431450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24376.346000, 9091.218000, 998.512029, 998.512029, 0.000000, X, Y) && !ellipse(24284.114480, 9786.466000, 2154.704062, 2154.704062, 0.000000, X, Y) && !ellipse(24107.418518, 8387.391624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.324000, 8094.530000, 1195.288034, 1195.288034, 0.000000, X, Y) && !ellipse(23501.016600, 9517.056600, 1014.672029, 1014.672029, 0.000000, X, Y) && !ellipse(23715.095459, 10393.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.305115, 10825.098808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25040.212616, 8459.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.755554, 9863.449188, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 3 02:39:10 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91.gif [Tue Jan 3 04:51:19 2012] Mean detx,y = (139.13, 16312.98) [Tue Jan 3 04:51:21 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 3 04:51:53 2012] Binned source spectrum to 10 counts/bin [Tue Jan 3 04:51:53 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91_src_b10.pi.gz [Tue Jan 3 04:51:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91_bgd.pi.gz [Tue Jan 3 08:17:21 2012] Not generating rmf since there are only 97 counts [Tue Jan 3 08:17:21 2012] rmf not generated due to insufficient counts [Tue Jan 3 08:18:14 2012] Updating aperture counts using extracted products [Tue Jan 3 08:18:14 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91_src_b10.pi.gz [Tue Jan 3 08:18:17 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 08:18:17 2012] Using photon index=1.80, rate=0.0145, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src91.arf [Tue Jan 3 08:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 08:18:17 2012] Updating source flux to 8e-13 [Tue Jan 3 08:27:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting