[Sun Jan  1 03:30:38 2012] Detection parameters:
  Position = (279.9, 135.7) = 5 34 33.46 21 50 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 429.3 +/- 28.6
  Background counts = 72.3
  Rate = 0.06 +/- 0.004

[Sun Jan  1 03:30:41 2012] Off-axis axis estimate = 11.88'
[Sun Jan  1 13:24:20 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Sun Jan  1 13:24:20 2012] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.917
[Sun Jan  1 13:24:20 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.37"
[Sun Jan  1 23:57:55 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jan  1 23:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16.csv
[Sun Jan  1 23:57:55 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jan  1 23:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16.csv
[Sun Jan  1 23:57:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:57:58 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jan  1 23:57:59 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jan  1 23:57:59 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Jan  1 23:58:52 2012] Warning, spatial fit 16 centroid is now closest to src. 22
[Sun Jan  1 23:58:53 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:53 2012] Assessing source extent using major
[Sun Jan  1 23:58:53 2012] Source does appear to be extended
[Sun Jan  1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:53 2012] Source is confused with source 22
[Mon Jan  2 09:16:39 2012] Using EEF radius (= 12.37 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 12.37"
[Mon Jan  2 09:16:39 2012] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.917
[Mon Jan  2 09:16:39 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.37"
[Mon Jan  2 22:43:28 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16.ximg exists
[Mon Jan  2 22:43:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16.csv
[Mon Jan  2 22:43:28 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Jan  2 22:43:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16.csv
[Mon Jan  2 22:43:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 22:43:31 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Jan  2 22:43:31 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jan  2 22:43:31 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Jan  2 22:44:27 2012] Spatial fit model total counts = 2557.920000, observed total counts = 2557.000000
[Mon Jan  2 22:44:27 2012] Offset between fit and detection position for source 7 = 0.505413 pixels
[Mon Jan  2 22:44:27 2012] 2322.916700 total counts/ 2236.880000 bgd. counts: snr = 1.819124
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.505413 pixels
  Position = (279.4, 135.7) = 5 34 33.62 21 50 28.4
  Extent = 4.7 (3.5-6.3)", rotation angle = 0
  Source counts = 86.0 +/- 48.2
  Background counts = 2236.9
  Rate = 0.01 +/- 0.007
[Mon Jan  2 22:44:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:44:28 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:44:28 2012] Source does appear to be extended
[Mon Jan  2 22:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 02:39:07 2012] XMMSAS src. selection expression = ellipse(24257.023500, 11757.780400, 282.225008, 282.225008, 0.000000, X, Y)
[Tue Jan  3 02:39:07 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7_src.reg
[Tue Jan  3 02:39:07 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (263, 119) - (296, 152)
[Tue Jan  3 02:39:07 2012] XMMSAS bgd. selection expression = annulus(24257.023500, 11757.780400, 470.375014, 940.750027, X, Y) && !ellipse(24272.043140, 12823.686400, 1406.360040, 315.982409, 90.000000, X, Y) && !ellipse(24510.701800, 10019.168400, 1533.352044, 1533.352044, 0.000000, X, Y) && !ellipse(24315.434753, 10741.930016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.047089, 13348.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.052000, 14832.906000, 3534.432102, 3534.432102, 0.000000, X, Y) && !ellipse(24410.524628, 12317.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.114480, 9786.466000, 2154.704062, 2154.704062, 0.000000, X, Y) && !ellipse(23822.857788, 11196.146454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.682800, 12308.159012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.185000, 13379.720000, 829.272024, 829.272024, 0.000000, X, Y) && !ellipse(23715.095459, 10393.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23777.199249, 12910.986069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.305115, 10825.098808, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 02:39:07 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7.gif
[Tue Jan  3 03:01:00 2012] Mean detx,y = (313.10, 12617.26) 
[Tue Jan  3 03:01:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 03:01:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 03:01:19 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan  3 03:01:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jan  3 05:45:15 2012] Not generating rmf since there are only 86 counts
[Tue Jan  3 05:45:15 2012] rmf not generated due to insufficient counts
[Tue Jan  3 08:18:11 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:11 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan  3 08:18:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:15 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src7.arf
[Tue Jan  3 08:18:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:15 2012] Updating source flux to 8.6e-13
[Tue Jan  3 08:27:22 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Tue Jan  3 08:27:22 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting