[Sun Jan  1 03:30:40 2012] Detection parameters:
  Position = (364.4, 260.0) = 5 34 7.04 21 59 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.6 +/- 26.2
  Background counts = 208.8
  Rate = 0.08 +/- 0.007

[Sun Jan  1 03:30:41 2012] Off-axis axis estimate = 5.53'
[Sun Jan  1 13:24:20 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sun Jan  1 13:24:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.952
[Sun Jan  1 13:24:20 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.19"
[Sun Jan  1 23:57:55 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jan  1 23:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10.csv
[Sun Jan  1 23:57:55 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jan  1 23:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10.csv
[Sun Jan  1 23:57:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:57:58 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jan  1 23:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jan  1 23:57:58 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jan  1 23:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jan  1 23:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:58:52 2012] Warning, spatial fit 10 centroid is now closest to src. 69
[Sun Jan  1 23:58:53 2012] Source 67 is offset by 0.434730 and -4.493939 pixels which is larger than
2 X fitted extent = 1.093660 x 1.093660, not incorporating fit results
[Sun Jan  1 23:58:53 2012] Spatial fit model total counts = 2865.570000, observed total counts = 2966.000000
[Sun Jan  1 23:58:53 2012] Offset between fit and detection position for source 67 = 3.435758 pixels
[Sun Jan  1 23:58:53 2012] Warning, changing simple spatial fit ID from 10 to 31
[Sun Jan  1 23:58:53 2012] 3002.686000 total counts/ 2407.290000 bgd. counts: snr = 12.135054
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 3.435758 pixels
  Position = (365.1, 263.4) = 5 34 6.80 21 59 43.8
  Extent = 18.3" x 18.3", rotation angle = -0
  Source counts = 595.4 +/- 54.8
  Background counts = 2407.3
  Rate = 0.09 +/- 0.008
[Sun Jan  1 23:58:53 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:53 2012] Assessing source extent using major
[Sun Jan  1 23:58:53 2012] Source does appear to be extended
[Sun Jan  1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:53 2012] Source is confused with source 69
[Sun Jan  1 23:58:53 2012] Source is confused with source 64
[Sun Jan  1 23:58:53 2012] Source is confused with source 68
[Sun Jan  1 23:58:53 2012] Source is confused with source 63
[Sun Jan  1 23:58:53 2012] Source is confused with source 71
[Mon Jan  2 09:16:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 09:16:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan  2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 18.32"
[Mon Jan  2 09:16:39 2012] source mask rpix=4.2, npix_max = 88, mask sum = 55, frac = 0.620
[Mon Jan  2 09:16:39 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 18.32"
[Mon Jan  2 22:43:27 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jan  2 22:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9.csv
[Mon Jan  2 22:43:27 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jan  2 22:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9.csv
[Mon Jan  2 22:43:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 22:43:31 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jan  2 22:43:31 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jan  2 22:43:31 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jan  2 22:44:27 2012] Warning, spatial fit 9 centroid is now closest to src. 70
[Mon Jan  2 22:44:27 2012] Spatial fit model total counts = 3944.590000, observed total counts = 4008.000000
[Mon Jan  2 22:44:27 2012] Offset between fit and detection position for source 67 = 1.288551 pixels
[Mon Jan  2 22:44:27 2012] Warning, changing simple spatial fit ID from 9 to 30
[Mon Jan  2 22:44:27 2012] 2064.796000 total counts/ 572.016000 bgd. counts: snr = 62.415394
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 1.288551 pixels
  Position = (364.3, 264.3) = 5 34 7.07 21 59 47.9
  Extent = 19.7 (19.6-39.4)" x 15.8 (14.6-17.2)", rotation angle = 90 (87-90) degrees
  Source counts = 1492.8 +/- 45.4
  Background counts = 572.0
  Rate = 0.2 +/- 0.007
[Mon Jan  2 22:44:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:44:28 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:44:28 2012] Source does appear to be extended
[Mon Jan  2 22:44:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Tue Jan  3 02:39:07 2012] Counts = 1492.780000, rescaling region sizes by 2.000000
[Tue Jan  3 02:39:07 2012] XMMSAS src. selection expression = ellipse(31642.264000, 22948.988000, 2363.664068, 1896.516055, 90.000000, X, Y)
[Tue Jan  3 02:39:07 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67_src.reg
[Tue Jan  3 02:39:07 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (228, 128) - (500, 400)
[Tue Jan  3 02:39:07 2012] XMMSAS bgd. selection expression = annulus(31642.264000, 22948.988000, 7878.880227, 15757.760453, X, Y) && !ellipse(32079.852875, 20979.156799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.110000, 17515.922200, 720.675221, 720.675221, 0.000000, X, Y) && !ellipse(24006.786000, 17308.312000, 1662.384048, 207.798406, 0.000000, X, Y) && !ellipse(24529.002655, 15781.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.140000, 16089.310000, 1651.600048, 1141.416033, 121.970600, X, Y) && !ellipse(24849.618000, 15242.127400, 1383.184040, 1383.184040, 0.000000, X, Y) && !ellipse(25489.160000, 31506.654600, 1408.872041, 1408.872041, 0.000000, X, Y) && !ellipse(23912.656000, 15531.420000, 595.006417, 468.017613, 252.486000, X, Y) && !ellipse(25656.468000, 31868.870800, 1432.504041, 1432.504041, 0.000000, X, Y) && !ellipse(24272.043140, 12823.686400, 1406.360040, 315.982409, 90.000000, X, Y) && !ellipse(24510.701800, 10019.168400, 1533.352044, 1533.352044, 0.000000, X, Y) && !ellipse(31788.301453, 24743.797180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.434753, 10741.930016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24257.023500, 11757.780400, 376.300011, 376.300011, 0.000000, X, Y) && !ellipse(23852.825104, 31526.199615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24533.515800, 31945.544000, 1464.984042, 1464.984042, 0.000000, X, Y) && !ellipse(24416.047089, 13348.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23113.522000, 31652.540000, 765.704822, 765.704822, 0.000000, X, Y) && !ellipse(25130.052000, 14832.906000, 3534.432102, 3534.432102, 0.000000, X, Y) && !ellipse(24178.044952, 9344.431450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.813400, 23928.503000, 1445.808042, 789.879223, 98.397650, X, Y) && !ellipse(25568.094200, 31579.940000, 1244.216036, 1244.216036, 0.000000, X, Y) && !ellipse(24410.524628, 12317.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.628000, 31845.622000, 2929.968084, 2929.968084, 0.000000, X, Y) && !ellipse(24376.346000, 9091.218000, 998.512029, 998.512029, 0.000000, X, Y) && !ellipse(24284.114480, 9786.466000, 2154.704062, 2154.704062, 0.000000, X, Y) && !ellipse(24388.344513, 13840.110916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31768.988000, 22127.404000, 1385.216040, 611.228018, 99.398000, X, Y) && !ellipse(31996.998000, 23357.936000, 787.889623, 787.889623, 0.000000, X, Y) && !ellipse(26357.338135, 32309.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24107.418518, 8387.391624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.622000, 31315.341000, 1405.816040, 1405.816040, 0.000000, X, Y) && !ellipse(17874.823532, 24661.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.374000, 31720.274400, 1577.344045, 1577.344045, 0.000000, X, Y) && !ellipse(23916.625458, 32393.417145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25489.082489, 33184.501709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.324000, 8094.530000, 1195.288034, 1195.288034, 0.000000, X, Y) && !ellipse(23822.857788, 11196.146454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21388.838440, 31687.742218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.642200, 31357.860200, 1402.256040, 1402.256040, 0.000000, X, Y) && !ellipse(32688.298000, 22465.684000, 1545.280044, 1545.280044, 0.000000, X, Y) && !ellipse(23884.682800, 12308.159012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32070.938800, 26708.763600, 1453.448042, 1453.448042, 0.000000, X, Y) && !ellipse(21172.804800, 17613.851400, 1668.856048, 612.930418, 2.008340, X, Y) && !ellipse(23526.130000, 32700.852000, 1480.528043, 1480.528043, 0.000000, X, Y) && !ellipse(31870.049805, 27099.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31815.260620, 25879.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32212.682000, 23455.368000, 2359.296068, 2359.296068, 0.000000, X, Y) && !ellipse(31627.968000, 22238.142000, 1040.072030, 1040.072030, 0.000000, X, Y) && !ellipse(27304.932200, 32175.786000, 1432.208041, 1432.208041, 0.000000, X, Y) && !ellipse(26351.823639, 31958.804779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23892.310699, 14980.483170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.362488, 22118.500229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17822.852661, 26404.839264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.016600, 9517.056600, 1014.672029, 1014.672029, 0.000000, X, Y) && !ellipse(17851.960600, 26704.008000, 1580.272045, 837.968024, 90.000000, X, Y) && !ellipse(31990.333252, 20051.427170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19520.500000, 31916.854000, 1578.944045, 1578.944045, 0.000000, X, Y) && !ellipse(31326.151123, 21335.476334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22792.748000, 32604.399400, 1525.936044, 1525.936044, 0.000000, X, Y) && !ellipse(23561.185000, 13379.720000, 829.272024, 829.272024, 0.000000, X, Y) && !ellipse(31476.340000, 20307.309200, 1591.464046, 1591.464046, 0.000000, X, Y) && !ellipse(22466.556000, 31661.082000, 1497.288043, 1497.288043, 0.000000, X, Y) && !ellipse(23715.095459, 10393.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18898.010757, 17687.042603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17434.210200, 21496.794000, 1658.136048, 1658.136048, 0.000000, X, Y) && !ellipse(23777.199249, 12910.986069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.674377, 19956.321365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17380.310860, 22439.930000, 2859.176082, 2859.176082, 0.000000, X, Y) && !ellipse(23583.305115, 10825.098808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.997345, 7896.961250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25040.212616, 8459.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.755554, 9863.449188, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 02:39:07 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67.gif
[Tue Jan  3 02:50:31 2012] Mean detx,y = (7616.85, 914.25) 
[Tue Jan  3 02:50:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 02:57:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 02:57:30 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Tue Jan  3 02:57:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Tue Jan  3 08:18:11 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:11 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Tue Jan  3 08:18:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:15 2012] Using photon index=1.80, rate=0.221, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src67.arf
[Tue Jan  3 08:18:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:15 2012] Updating source flux to 4.1e-12
[Tue Jan  3 08:27:22 2012] Flag b found in src. 67 procflags, skipping spectral fitting
[Tue Jan  3 08:27:22 2012] Flag c found in src. 67 procflags, skipping spectral fitting