[Sun Jan  1 03:30:39 2012] Detection parameters:
  Position = (269.3, 372.0) = 5 34 36.77 22 7 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.0 +/- 24.2
  Background counts = 191.6
  Rate = 0.03 +/- 0.005

[Sun Jan  1 03:30:41 2012] Off-axis axis estimate = 5.74'
[Sun Jan  1 13:24:20 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Sun Jan  1 13:24:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.863
[Sun Jan  1 13:24:20 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.30"
[Sun Jan  1 23:57:56 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jan  1 23:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53.csv
[Sun Jan  1 23:57:56 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jan  1 23:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53.csv
[Sun Jan  1 23:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:58:00 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jan  1 23:58:00 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jan  1 23:58:01 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sun Jan  1 23:58:53 2012] Spatial fit model total counts = 2967.800000, observed total counts = 2971.000000
[Sun Jan  1 23:58:53 2012] Offset between fit and detection position for source 35 = 3.935401 pixels
[Sun Jan  1 23:58:53 2012] Warning, changing simple spatial fit ID from 53 to 39
[Sun Jan  1 23:58:53 2012] 2859.389000 total counts/ 2623.080000 bgd. counts: snr = 4.613967
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.935401 pixels
  Position = (269.7, 375.9) = 5 34 36.64 22 7 53.3
  Extent = 18.5 (18.5-37.0)", rotation angle = 0
  Source counts = 236.3 +/- 53.5
  Background counts = 2623.1
  Rate = 0.03 +/- 0.008
[Sun Jan  1 23:58:53 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:53 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:58:53 2012] Source does appear to be extended
[Sun Jan  1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:53 2012] Source is confused with source 33
[Mon Jan  2 09:16:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 18.51"
[Mon Jan  2 09:16:39 2012] source mask rpix=4.3, npix_max = 90, mask sum = 79, frac = 0.874
[Mon Jan  2 09:16:39 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 18.51"
[Mon Jan  2 22:43:29 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49.ximg exists
[Mon Jan  2 22:43:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49.csv
[Mon Jan  2 22:43:29 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Jan  2 22:43:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49.csv
[Mon Jan  2 22:43:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 22:43:33 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Jan  2 22:43:33 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Jan  2 22:43:33 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Mon Jan  2 22:44:27 2012] Spatial fit model total counts = 2983.020000, observed total counts = 2971.000000
[Mon Jan  2 22:44:27 2012] Offset between fit and detection position for source 35 = 1.334067 pixels
[Mon Jan  2 22:44:27 2012] Warning, changing simple spatial fit ID from 49 to 37
[Mon Jan  2 22:44:27 2012] 2679.273000 total counts/ 2280.380000 bgd. counts: snr = 8.353199
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.334067 pixels
  Position = (271.0, 376.4) = 5 34 36.26 22 7 55.6
  Extent = 18.5 (18.5-37.0)", rotation angle = 0
  Source counts = 398.9 +/- 51.8
  Background counts = 2280.4
  Rate = 0.06 +/- 0.008
[Mon Jan  2 22:44:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:44:28 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:44:28 2012] Source does appear to be extended
[Mon Jan  2 22:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 02:39:09 2012] XMMSAS src. selection expression = ellipse(23526.130000, 32700.852000, 1110.396032, 1110.396032, 0.000000, X, Y)
[Tue Jan  3 02:39:09 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35_src.reg
[Tue Jan  3 02:39:09 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (207, 313) - (335, 440)
[Tue Jan  3 02:39:09 2012] XMMSAS bgd. selection expression = annulus(23526.130000, 32700.852000, 1850.660053, 3701.320107, X, Y) && !ellipse(25489.160000, 31506.654600, 1408.872041, 1408.872041, 0.000000, X, Y) && !ellipse(25656.468000, 31868.870800, 1432.504041, 1432.504041, 0.000000, X, Y) && !ellipse(23852.825104, 31526.199615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24533.515800, 31945.544000, 1464.984042, 1464.984042, 0.000000, X, Y) && !ellipse(23113.522000, 31652.540000, 765.704822, 765.704822, 0.000000, X, Y) && !ellipse(25568.094200, 31579.940000, 1244.216036, 1244.216036, 0.000000, X, Y) && !ellipse(23725.628000, 31845.622000, 2929.968084, 2929.968084, 0.000000, X, Y) && !ellipse(26357.338135, 32309.762482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.622000, 31315.341000, 1405.816040, 1405.816040, 0.000000, X, Y) && !ellipse(20431.374000, 31720.274400, 1577.344045, 1577.344045, 0.000000, X, Y) && !ellipse(23916.625458, 32393.417145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25489.082489, 33184.501709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21388.838440, 31687.742218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26654.642200, 31357.860200, 1402.256040, 1402.256040, 0.000000, X, Y) && !ellipse(27304.932200, 32175.786000, 1432.208041, 1432.208041, 0.000000, X, Y) && !ellipse(26351.823639, 31958.804779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19520.500000, 31916.854000, 1578.944045, 1578.944045, 0.000000, X, Y) && !ellipse(22792.748000, 32604.399400, 1525.936044, 1525.936044, 0.000000, X, Y) && !ellipse(22466.556000, 31661.082000, 1497.288043, 1497.288043, 0.000000, X, Y)
[Tue Jan  3 02:39:09 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35.gif
[Tue Jan  3 04:01:59 2012] Mean detx,y = (-1530.84, -8152.48) 
[Tue Jan  3 04:02:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 04:02:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 04:02:33 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan  3 04:02:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jan  3 08:18:13 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:13 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan  3 08:18:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:16 2012] Using photon index=1.80, rate=0.0591, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src35.arf
[Tue Jan  3 08:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:16 2012] Updating source flux to 9.1e-13
[Tue Jan  3 08:27:22 2012] Flag c found in src. 35 procflags, skipping spectral fitting