[Sun Jan  1 03:30:37 2012] Detection parameters:
  Position = (282.5, 201.4) = 5 34 32.64 21 55 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 610.9 +/- 31.9
  Background counts = 221.1
  Rate = 0.1 +/- 0.008

[Sun Jan  1 03:30:41 2012] Off-axis axis estimate = 7.13'
[Sun Jan  1 13:24:20 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jan  1 13:24:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.639
[Sun Jan  1 13:24:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.99"
[Sun Jan  1 23:57:54 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jan  1 23:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2.csv
[Sun Jan  1 23:57:54 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jan  1 23:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2.csv
[Sun Jan  1 23:57:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:57:58 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jan  1 23:57:58 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jan  1 23:57:58 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jan  1 23:58:52 2012] Warning, spatial fit 2 centroid is now closest to src. 80
[Sun Jan  1 23:58:52 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.909118 pixels away
[Sun Jan  1 23:58:53 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:53 2012] Assessing source extent using major
[Sun Jan  1 23:58:53 2012] Source does appear to be extended
[Sun Jan  1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:53 2012] Source is confused with source 14
[Mon Jan  2 09:16:39 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Jan  2 09:16:39 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.639
[Mon Jan  2 09:16:39 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.99"
[Mon Jan  2 22:43:27 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jan  2 22:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2.csv
[Mon Jan  2 22:43:27 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jan  2 22:43:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2.csv
[Mon Jan  2 22:43:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 22:43:30 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jan  2 22:43:30 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jan  2 22:43:30 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jan  2 22:44:27 2012] Warning, spatial fit 2 centroid is now closest to src. 15
[Mon Jan  2 22:44:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.152189 pixels away
[Mon Jan  2 22:44:27 2012] Spatial fit model total counts = 3094.050000, observed total counts = 3107.000000
[Mon Jan  2 22:44:27 2012] Offset between fit and detection position for source 3 = 0.656507 pixels
[Mon Jan  2 22:44:27 2012] Warning, changing simple spatial fit ID from 2 to 4
[Mon Jan  2 22:44:27 2012] 2926.802000 total counts/ 2473.140000 bgd. counts: snr = 9.122378
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.656507 pixels
  Position = (282.9, 201.9) = 5 34 32.51 21 55 16.3
  Extent = 9.0 (8.2-9.7)", rotation angle = 0
  Source counts = 453.7 +/- 54.1
  Background counts = 2473.1
  Rate = 0.07 +/- 0.008
[Mon Jan  2 22:44:28 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:44:28 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:44:28 2012] Source does appear to be extended
[Mon Jan  2 22:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan  3 02:39:06 2012] XMMSAS src. selection expression = ellipse(24565.110000, 17515.922200, 540.506416, 540.506416, 0.000000, X, Y)
[Tue Jan  3 02:39:06 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan  3 02:39:06 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (252, 171) - (314, 233)
[Tue Jan  3 02:39:06 2012] XMMSAS bgd. selection expression = annulus(24565.110000, 17515.922200, 900.844026, 1801.688052, X, Y) && !ellipse(24006.786000, 17308.312000, 1662.384048, 207.798406, 0.000000, X, Y) && !ellipse(24529.002655, 15781.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.140000, 16089.310000, 1651.600048, 1141.416033, 121.970600, X, Y) && !ellipse(24849.618000, 15242.127400, 1383.184040, 1383.184040, 0.000000, X, Y) && !ellipse(23912.656000, 15531.420000, 595.006417, 468.017613, 252.486000, X, Y) && !ellipse(25130.052000, 14832.906000, 3534.432102, 3534.432102, 0.000000, X, Y) && !ellipse(21172.804800, 17613.851400, 1668.856048, 612.930418, 2.008340, X, Y) && !ellipse(23892.310699, 14980.483170, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan  3 02:39:06 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3.gif
[Tue Jan  3 02:41:31 2012] Mean detx,y = (340.40, 6889.36) 
[Tue Jan  3 02:41:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 02:41:48 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 02:41:48 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 02:41:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan  3 08:18:10 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:10 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan  3 08:18:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:14 2012] Using photon index=1.80, rate=0.0672, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 08:18:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:14 2012] Updating source flux to 2.5e-12
[Tue Jan  3 08:27:22 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Jan  3 08:37:41 2012] Reading fit data from xmm0412592001/analysis//spectral/fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jan  3 08:37:41 2012] Spectral fit parameter nH value = 1.83449e+21
[Tue Jan  3 08:37:41 2012] Spectral fit parameter PhoIndex value = 1.98759
[Tue Jan  3 08:37:41 2012] Failed to get F(0.3-8.0) from xmm0412592001/analysis//spectral/fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jan  3 08:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:37:41 2012] Using Nh = 1.8e+21, photon index=1.99, rate=0.0672, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src3.arf
[Tue Jan  3 08:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:37:41 2012] Updating source flux to 2.5e-12