[Sun Jan 1 03:30:38 2012] Detection parameters: Position = (275.1, 142.0) = 5 34 34.95 21 50 54.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 230.7 +/- 25.3 Background counts = 74.4 Rate = 0.03 +/- 0.004 [Sun Jan 1 03:30:41 2012] Off-axis axis estimate = 11.47' [Sun Jan 1 13:24:20 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting [Sun Jan 1 13:24:20 2012] Initial guess for spatial extent in simple fitting = 12.16" [Sun Jan 1 13:24:20 2012] source mask rpix=2.8, npix_max = 43, mask sum = 34, frac = 0.783 [Sun Jan 1 13:24:20 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.16" [Sun Jan 1 23:57:56 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49.ximg exists [Sun Jan 1 23:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49.csv [Sun Jan 1 23:57:56 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49_1.ximg exists [Sun Jan 1 23:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49.csv [Sun Jan 1 23:57:56 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jan 1 23:58:00 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src49.ximg exists [Sun Jan 1 23:58:00 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists [Sun Jan 1 23:58:00 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly [Sun Jan 1 23:58:52 2012] Source 23 is offset by 7.889251 and 5.235368 pixels which is larger than 2 X fitted extent = 1.536901 x 1.536901, not incorporating fit results [Sun Jan 1 23:58:52 2012] Source 23 is offset by 4.354354 and -1.709138 pixels which is larger than 2 X fitted extent = 1.345039 x 1.345039, not incorporating fit results [Sun Jan 1 23:58:53 2012] Source 23 is offset by 6.874308 and 2.909644 pixels which is larger than 2 X fitted extent = 1.450956 x 2.528170, not incorporating fit results [Sun Jan 1 23:58:53 2012] Warning, spatial fit 49 centroid is now closest to src. 87 [Sun Jan 1 23:58:53 2012] Vigneting correction estimate = 1.000000 [Sun Jan 1 23:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jan 1 23:58:53 2012] Assessing source extent using major [Sun Jan 1 23:58:53 2012] Source does appear to be extended [Sun Jan 1 23:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jan 1 23:58:53 2012] Source is confused with source 6 [Mon Jan 2 09:16:39 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting [Mon Jan 2 09:16:39 2012] Initial guess for spatial extent in simple fitting = 12.16" [Mon Jan 2 09:16:39 2012] source mask rpix=2.8, npix_max = 43, mask sum = 34, frac = 0.783 [Mon Jan 2 09:16:39 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 12.16" [Mon Jan 2 22:43:29 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src45.ximg exists [Mon Jan 2 22:43:29 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src45_1.ximg exists [Mon Jan 2 22:43:29 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_src45 appears to have run properly [Mon Jan 2 22:43:32 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src45.ximg exists [Mon Jan 2 22:43:33 2012] fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists [Mon Jan 2 22:43:33 2012] Fit fullrun_mos2_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly [Mon Jan 2 22:44:27 2012] Warning, spatial fit 45 centroid is now closest to src. 21 [Mon Jan 2 22:44:28 2012] Source 23 is offset by 6.175572 and 2.949897 pixels which is larger than 2 X fitted extent = 1.604515 x 1.604515, not incorporating fit results [Mon Jan 2 22:44:28 2012] Vigneting correction estimate = 1.000000 [Mon Jan 2 22:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 2 22:44:28 2012] Assessing source extent using major [Mon Jan 2 22:44:28 2012] Source does appear to be extended [Mon Jan 2 22:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 3 02:39:09 2012] XMMSAS src. selection expression = ellipse(23884.682800, 12308.159012, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jan 3 02:39:09 2012] Writing source region out to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23_src.reg [Tue Jan 3 02:39:09 2012] Extracting stamp from image fullrun_mos2_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (238, 105) - (313, 180) [Tue Jan 3 02:39:09 2012] XMMSAS bgd. selection expression = annulus(23884.682800, 12308.159012, 1087.500000, 2175.000000, X, Y) && !ellipse(24872.140000, 16089.310000, 1651.600048, 1141.416033, 121.970600, X, Y) && !ellipse(24849.618000, 15242.127400, 1383.184040, 1383.184040, 0.000000, X, Y) && !ellipse(24272.043140, 12823.686400, 1406.360040, 315.982409, 90.000000, X, Y) && !ellipse(24510.701800, 10019.168400, 1533.352044, 1533.352044, 0.000000, X, Y) && !ellipse(24315.434753, 10741.930016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24257.023500, 11757.780400, 376.300011, 376.300011, 0.000000, X, Y) && !ellipse(24416.047089, 13348.813675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25130.052000, 14832.906000, 3534.432102, 3534.432102, 0.000000, X, Y) && !ellipse(24178.044952, 9344.431450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.524628, 12317.176819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.114480, 9786.466000, 2154.704062, 2154.704062, 0.000000, X, Y) && !ellipse(24388.344513, 13840.110916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.857788, 11196.146454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23892.310699, 14980.483170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23501.016600, 9517.056600, 1014.672029, 1014.672029, 0.000000, X, Y) && !ellipse(23561.185000, 13379.720000, 829.272024, 829.272024, 0.000000, X, Y) && !ellipse(23715.095459, 10393.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23777.199249, 12910.986069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23583.305115, 10825.098808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.755554, 9863.449188, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 3 02:39:09 2012] Writing fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23.gif [Tue Jan 3 03:59:37 2012] Mean detx,y = (-60.04, 12052.78) [Tue Jan 3 03:59:40 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 3 04:00:05 2012] Binned source spectrum to 10 counts/bin [Tue Jan 3 04:00:05 2012] Setting source spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Tue Jan 3 04:00:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23_bgd.pi.gz [Tue Jan 3 07:08:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Jan 3 07:08:46 2012] rmf not generated due to insufficient counts [Tue Jan 3 08:18:13 2012] Updating aperture counts using extracted products [Tue Jan 3 08:18:13 2012] Error reading totcts from fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Tue Jan 3 08:18:16 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 08:18:16 2012] Using photon index=1.80, rate=0.0341, arf fullrun_mos2_xmm0412592001_pi300-10000_pass1_cl_src23.arf [Tue Jan 3 08:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 08:18:16 2012] Updating source flux to 1e-12 [Tue Jan 3 08:27:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting