[Sun Jan  1 03:29:25 2012] Detection parameters:
  Position = (285.2, 201.0) = 5 34 31.80 21 55 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 343.4 +/- 32.9
  Background counts = 247.6
  Rate = 0.07 +/- 0.007

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 7.13'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.99"
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6.csv
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6.csv
[Sun Jan  1 13:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jan  1 13:24:18 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jan  1 13:24:18 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jan  1 23:58:30 2012] Warning, spatial fit 6 centroid is now closest to src. 61
[Sun Jan  1 23:58:30 2012] Spatial fit model total counts = 3638.960000, observed total counts = 3639.000000
[Sun Jan  1 23:58:30 2012] Offset between fit and detection position for source 8 = 5.743526 pixels
[Sun Jan  1 23:58:30 2012] Warning, changing simple spatial fit ID from 6 to 51
[Sun Jan  1 23:58:30 2012] 3543.405000 total counts/ 2977.670000 bgd. counts: snr = 10.367517
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.743526 pixels
  Position = (283.2, 195.6) = 5 34 32.43 21 54 49.0
  Extent = 20.8 (20.8-41.7)", rotation angle = 0
  Source counts = 565.7 +/- 59.5
  Background counts = 2977.7
  Rate = 0.08 +/- 0.009
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:30 2012] Source is confused with source 7
[Sun Jan  1 23:59:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 20.83"
[Sun Jan  1 23:59:16 2012] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.983
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 20.83"
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jan  2 09:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6.csv
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jan  2 09:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6.csv
[Mon Jan  2 09:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jan  2 09:16:37 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Jan  2 22:43:59 2012] Source 8 is offset by -5.006966 and 1.781724 pixels which is larger than
2 X fitted extent = 1.146589 x 1.146589, not incorporating fit results
[Mon Jan  2 22:43:59 2012] Spatial fit model total counts = 10439.600000, observed total counts = 10475.000000
[Mon Jan  2 22:43:59 2012] Offset between fit and detection position for source 8 = 3.775028 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 3.775028 pixels
  Position = (284.7, 199.0) = 5 34 31.94 21 55 3.9
  Extent = 41.7 (41.6-83.3)", rotation angle = 0
  Source counts = 10053.8 +/- 100.3
  Background counts = 0.0
  Rate = 1 +/- 0.01
[Mon Jan  2 22:43:59 2012] Spatial fit model total counts = 9114.940000, observed total counts = 9122.000000
[Mon Jan  2 22:43:59 2012] Offset between fit and detection position for source 8 = 2.869609 pixels
[Mon Jan  2 22:43:59 2012] Warning, changing simple spatial fit ID from 6 to 44
[Mon Jan  2 22:43:59 2012] 8964.820000 total counts/ 8217.380000 bgd. counts: snr = 8.245361
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.869609 pixels
  Position = (282.6, 197.1) = 5 34 32.60 21 54 55.4
  Extent = 29.7 (23.3-41.9)", rotation angle = 0
  Source counts = 747.4 +/- 94.7
  Background counts = 8217.4
  Rate = 0.1 +/- 0.01
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 22:44:51 2012] XMMSAS src. selection expression = ellipse(24541.962000, 17097.362000, 1783.908051, 1783.908051, 0.000000, X, Y)
[Mon Jan  2 22:44:51 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8_src.reg
[Mon Jan  2 22:44:51 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (180, 95) - (385, 300)
[Mon Jan  2 22:44:52 2012] XMMSAS bgd. selection expression = annulus(24541.962000, 17097.362000, 2973.180086, 5946.360171, X, Y) && !ellipse(25824.187012, 17527.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.002655, 21958.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.228000, 17757.382000, 1633.616047, 826.488024, 6.254000, X, Y) && !ellipse(20419.188553, 17795.257614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.647552, 17540.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.394928, 17572.195328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24173.776000, 11897.020400, 1984.088057, 1984.088057, 0.000000, X, Y) && !ellipse(24227.748800, 10960.134000, 3198.016092, 2318.392067, 270.128000, X, Y) && !ellipse(24232.030000, 10507.404000, 2106.072061, 2106.072061, 0.000000, X, Y) && !ellipse(33015.885000, 24684.708000, 2959.760085, 846.400024, 358.599230, X, Y) && !ellipse(17824.355408, 23784.216492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17770.228653, 22134.721130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17787.492981, 21427.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31302.420471, 20130.418274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.840000, 17737.403800, 1726.320050, 1726.320050, 0.000000, X, Y) && !ellipse(22878.007202, 17363.249832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.219345, 17706.251740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18311.062075, 18006.229708, 1765.040051, 1287.499969, 11.101650, X, Y) && !ellipse(18310.324005, 17132.574249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20062.130000, 16811.166000, 1286.672037, 1286.672037, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24533.234800, 15458.795200, 1382.352040, 1382.352040, 0.000000, X, Y) && !ellipse(23966.293091, 15000.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.005035, 14483.674088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.392029, 13706.947922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.799800, 13601.942000, 1891.792054, 1891.792054, 0.000000, X, Y) && !ellipse(24658.966339, 13265.408585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.702000, 13266.022000, 2738.160079, 2738.160079, 0.000000, X, Y) && !ellipse(24119.668000, 11359.606000, 1891.792054, 1522.464044, 90.000000, X, Y) && !ellipse(24319.387864, 12377.294939, 3198.016092, 2316.547709, 277.026291, X, Y) && !ellipse(24742.265600, 11458.926000, 2489.688072, 1329.328038, 102.280000, X, Y)
[Mon Jan  2 22:44:52 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8.gif
[Mon Jan  2 22:58:36 2012] Mean detx,y = (7716.26, -383.38) 
[Mon Jan  2 22:58:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 22:59:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 22:59:23 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jan  2 22:59:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jan  3 08:18:04 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:04 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jan  3 08:18:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:08 2012] Using photon index=1.80, rate=0.111, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src8.arf
[Tue Jan  3 08:18:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:08 2012] Updating source flux to 1.5e-12
[Tue Jan  3 08:18:20 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Tue Jan  3 08:18:20 2012] Flag c found in src. 8 procflags, skipping spectral fitting