[Sun Jan  1 03:29:28 2012] Detection parameters:
  Position = (272.2, 135.8) = 5 34 35.84 21 50 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.3 +/- 18.0
  Background counts = 78.7
  Rate = 0.01 +/- 0.003

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 11.94'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.9, npix_max = 44, mask sum = 49, frac = 1.091
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 12.40"
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63.csv
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63.csv
[Sun Jan  1 13:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Jan  1 13:24:19 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun Jan  1 23:58:30 2012] Warning, spatial fit 63 centroid is now closest to src. 10
[Sun Jan  1 23:58:30 2012] Source 73 is offset by 1.216689 and 5.811555 pixels which is larger than
2 X fitted extent = 1.497117 x 1.497117, not incorporating fit results
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:30 2012] Source is confused with source 10
[Sun Jan  1 23:59:16 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Sun Jan  1 23:59:16 2012] source mask rpix=2.9, npix_max = 44, mask sum = 49, frac = 1.091
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 12.40"
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jan  2 09:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53.csv
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jan  2 09:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53.csv
[Mon Jan  2 09:16:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jan  2 09:16:39 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Jan  2 22:43:59 2012] Warning, spatial fit 53 centroid is now closest to src. 70
[Mon Jan  2 22:43:59 2012] Spatial fit model total counts = 10565.900000, observed total counts = 10575.000000
[Mon Jan  2 22:43:59 2012] Offset between fit and detection position for source 73 = 7.251530 pixels
[Mon Jan  2 22:43:59 2012] Warning, changing simple spatial fit ID from 53 to 54
[Mon Jan  2 22:43:59 2012] 8451.404000 total counts/ 7879.980000 bgd. counts: snr = 6.437184
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 7.251530 pixels
  Position = (277.8, 131.1) = 5 34 34.11 21 50 8.5
  Extent = 23.6 (23.6-47.3)" x 19.0 (14.2-23.3)", rotation angle = 90
  Source counts = 571.4 +/- 91.9
  Background counts = 7880.0
  Rate = 0.08 +/- 0.01
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Mon Jan  2 22:44:56 2012] XMMSAS src. selection expression = ellipse(24119.668000, 11359.606000, 1418.844041, 1141.848033, 90.000000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73_src.reg
[Mon Jan  2 22:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (196, 50) - (359, 213)
[Mon Jan  2 22:44:56 2012] XMMSAS bgd. selection expression = annulus(24119.668000, 11359.606000, 2364.740068, 4729.480136, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(24173.776000, 11897.020400, 1984.088057, 1984.088057, 0.000000, X, Y) && !ellipse(24227.748800, 10960.134000, 3198.016092, 2318.392067, 270.128000, X, Y) && !ellipse(24232.030000, 10507.404000, 2106.072061, 2106.072061, 0.000000, X, Y) && !ellipse(24136.591200, 8762.755280, 2322.920067, 1187.008034, 89.657000, X, Y) && !ellipse(19121.840000, 17737.403800, 1726.320050, 1726.320050, 0.000000, X, Y) && !ellipse(20062.130000, 16811.166000, 1286.672037, 1286.672037, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24533.234800, 15458.795200, 1382.352040, 1382.352040, 0.000000, X, Y) && !ellipse(23966.293091, 15000.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.005035, 14483.674088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.392029, 13706.947922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.799800, 13601.942000, 1891.792054, 1891.792054, 0.000000, X, Y) && !ellipse(24658.966339, 13265.408585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.702000, 13266.022000, 2738.160079, 2738.160079, 0.000000, X, Y) && !ellipse(24319.387864, 12377.294939, 3198.016092, 2316.547709, 277.026291, X, Y) && !ellipse(24742.265600, 11458.926000, 2489.688072, 1329.328038, 102.280000, X, Y) && !ellipse(23961.163574, 9871.543709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.634094, 10134.712204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.093872, 7789.760460, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73.gif
[Tue Jan  3 00:18:10 2012] Mean detx,y = (13174.08, -330.59) 
[Tue Jan  3 00:18:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 00:18:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 00:18:51 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jan  3 00:18:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Tue Jan  3 08:18:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:07 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jan  3 08:18:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:10 2012] Using photon index=1.80, rate=0.0847, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src73.arf
[Tue Jan  3 08:18:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:10 2012] Updating source flux to 1.8e-12
[Tue Jan  3 08:18:20 2012] Flag b found in src. 73 procflags, skipping spectral fitting
[Tue Jan  3 08:18:20 2012] Flag c found in src. 73 procflags, skipping spectral fitting