[Sun Jan  1 03:29:28 2012] Detection parameters:
  Position = (278.3, 151.0) = 5 34 33.95 21 51 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.0 +/- 21.2
  Background counts = 102.1
  Rate = 0.04 +/- 0.006

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 10.79'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 11.82"
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61.csv
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61.csv
[Sun Jan  1 13:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Jan  1 13:24:19 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Jan  1 23:58:30 2012] Warning, spatial fit 61 centroid is now closest to src. 69
[Sun Jan  1 23:58:30 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 13.011446 pixels away
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:30 2012] Source is confused with source 10
[Sun Jan  1 23:59:16 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Sun Jan  1 23:59:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 11.82"
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src52.ximg exists
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon Jan  2 09:16:36 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src52 appears to have run properly
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Jan  2 09:16:39 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Mon Jan  2 22:43:59 2012] Spatial fit model total counts = 7842.470000, observed total counts = 7847.000000
[Mon Jan  2 22:43:59 2012] Offset between fit and detection position for source 71 = 2.178990 pixels
[Mon Jan  2 22:43:59 2012] Warning, changing simple spatial fit ID from 52 to 50
[Mon Jan  2 22:43:59 2012] 7350.570000 total counts/ 6045.290000 bgd. counts: snr = 16.787851
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 2.178990 pixels
  Position = (279.0, 153.0) = 5 34 33.74 21 51 43.8
  Extent = 34.2 (28.7-44.1)", rotation angle = 0
  Source counts = 1305.3 +/- 85.7
  Background counts = 6045.3
  Rate = 0.2 +/- 0.01
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 22:44:56 2012] Counts = 1305.280000, rescaling region sizes by 2.000000
[Mon Jan  2 22:44:56 2012] XMMSAS src. selection expression = ellipse(24223.702000, 13266.022000, 4107.240118, 4107.240118, 0.000000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71_src.reg
[Mon Jan  2 22:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (43, 0) - (515, 389)
[Mon Jan  2 22:44:56 2012] XMMSAS bgd. selection expression = annulus(24223.702000, 13266.022000, 13690.800394, 27381.600788, X, Y) && !ellipse(25824.187012, 17527.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.455902, 25619.919678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.002655, 21958.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.228000, 17757.382000, 1633.616047, 826.488024, 6.254000, X, Y) && !ellipse(20419.188553, 17795.257614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.647552, 17540.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.394928, 17572.195328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(24173.776000, 11897.020400, 1984.088057, 1984.088057, 0.000000, X, Y) && !ellipse(24227.748800, 10960.134000, 3198.016092, 2318.392067, 270.128000, X, Y) && !ellipse(24232.030000, 10507.404000, 2106.072061, 2106.072061, 0.000000, X, Y) && !ellipse(24136.591200, 8762.755280, 2322.920067, 1187.008034, 89.657000, X, Y) && !ellipse(31489.000000, 29724.045380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17923.250800, 29626.109000, 1621.080047, 701.838420, 95.692210, X, Y) && !ellipse(31845.362000, 28886.992000, 999.680029, 999.680029, 0.000000, X, Y) && !ellipse(18012.214661, 28480.408417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32220.471191, 28407.777435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32300.076935, 27935.208771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17330.196600, 27827.444000, 1599.560046, 1599.560046, 0.000000, X, Y) && !ellipse(18001.305145, 27950.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17460.065475, 27280.260834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32514.728088, 27435.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31589.434448, 26558.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32686.144745, 26465.233215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.086365, 26322.382019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.002655, 26142.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17671.337600, 26249.680800, 1333.800038, 1333.800038, 0.000000, X, Y) && !ellipse(16840.426773, 25775.350403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17549.308200, 25578.382000, 1531.128044, 1531.128044, 0.000000, X, Y) && !ellipse(32784.336000, 25667.874200, 1449.176042, 1449.176042, 0.000000, X, Y) && !ellipse(31492.748901, 25103.959869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17453.587204, 25039.530273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33015.885000, 24684.708000, 2959.760085, 846.400024, 358.599230, X, Y) && !ellipse(31493.911804, 24567.458099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.002655, 23793.386963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17824.355408, 23784.216492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31774.901520, 23351.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 22929.668762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31835.476013, 22492.308441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17770.228653, 22134.721130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17787.492981, 21427.713379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.220520, 21246.443909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31664.269104, 21176.967102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32644.941345, 20384.509888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31302.420471, 20130.418274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19121.840000, 17737.403800, 1726.320050, 1726.320050, 0.000000, X, Y) && !ellipse(22878.007202, 17363.249832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.219345, 17706.251740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18311.062075, 18006.229708, 1765.040051, 1287.499969, 11.101650, X, Y) && !ellipse(18310.324005, 17132.574249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20062.130000, 16811.166000, 1286.672037, 1286.672037, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24533.234800, 15458.795200, 1382.352040, 1382.352040, 0.000000, X, Y) && !ellipse(23966.293091, 15000.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.005035, 14483.674088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.392029, 13706.947922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.799800, 13601.942000, 1891.792054, 1891.792054, 0.000000, X, Y) && !ellipse(24658.966339, 13265.408585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24119.668000, 11359.606000, 1891.792054, 1522.464044, 90.000000, X, Y) && !ellipse(24319.387864, 12377.294939, 3198.016092, 2316.547709, 277.026291, X, Y) && !ellipse(24742.265600, 11458.926000, 2489.688072, 1329.328038, 102.280000, X, Y) && !ellipse(23961.163574, 9871.543709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.634094, 10134.712204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.093872, 7789.760460, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71.gif
[Tue Jan  3 00:06:29 2012] Mean detx,y = (10466.26, -169.24) 
[Tue Jan  3 00:06:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 00:18:01 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 00:18:01 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Jan  3 00:18:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Jan  3 08:18:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:07 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Jan  3 08:18:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:10 2012] Using photon index=1.80, rate=0.193, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src71.arf
[Tue Jan  3 08:18:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:10 2012] Updating source flux to 3.4e-12
[Tue Jan  3 08:18:20 2012] Flag c found in src. 71 procflags, skipping spectral fitting