[Sun Jan  1 03:29:28 2012] Detection parameters:
  Position = (284.0, 153.0) = 5 34 32.17 21 51 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.2 +/- 22.7
  Background counts = 106.7
  Rate = 0.05 +/- 0.007

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 10.59'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 11.73"
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60.csv
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60.csv
[Sun Jan  1 13:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun Jan  1 13:24:19 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Jan  1 13:24:19 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sun Jan  1 23:58:30 2012] Warning, spatial fit 60 centroid is now closest to src. 67
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:30 2012] Source is confused with source 10
[Sun Jan  1 23:59:16 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Sun Jan  1 23:59:16 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 11.73"
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51.ximg exists
[Mon Jan  2 09:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51.csv
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51_1.ximg exists
[Mon Jan  2 09:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51.csv
[Mon Jan  2 09:16:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Mon Jan  2 09:16:39 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Mon Jan  2 09:16:39 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Mon Jan  2 22:43:59 2012] Warning, spatial fit 51 centroid is now closest to src. 65
[Mon Jan  2 22:43:59 2012] Source 70 is offset by 1.091061 and 5.130627 pixels which is larger than
2 X fitted extent = 1.425352 x 1.425352, not incorporating fit results
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 22:44:56 2012] XMMSAS src. selection expression = ellipse(24658.966339, 13265.408585, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70_src.reg
[Mon Jan  2 22:44:56 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (246, 116) - (321, 191)
[Mon Jan  2 22:44:56 2012] XMMSAS bgd. selection expression = annulus(24658.966339, 13265.408585, 1087.500000, 2175.000000, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(24173.776000, 11897.020400, 1984.088057, 1984.088057, 0.000000, X, Y) && !ellipse(24227.748800, 10960.134000, 3198.016092, 2318.392067, 270.128000, X, Y) && !ellipse(24232.030000, 10507.404000, 2106.072061, 2106.072061, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24533.234800, 15458.795200, 1382.352040, 1382.352040, 0.000000, X, Y) && !ellipse(23966.293091, 15000.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.005035, 14483.674088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.392029, 13706.947922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.799800, 13601.942000, 1891.792054, 1891.792054, 0.000000, X, Y) && !ellipse(24223.702000, 13266.022000, 2738.160079, 2738.160079, 0.000000, X, Y) && !ellipse(24119.668000, 11359.606000, 1891.792054, 1522.464044, 90.000000, X, Y) && !ellipse(24319.387864, 12377.294939, 3198.016092, 2316.547709, 277.026291, X, Y) && !ellipse(24742.265600, 11458.926000, 2489.688072, 1329.328038, 102.280000, X, Y)
[Mon Jan  2 22:44:56 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70.gif
[Tue Jan  3 00:05:59 2012] Mean detx,y = (11279.34, -692.20) 
[Tue Jan  3 00:06:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 00:06:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 00:06:14 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Jan  3 00:06:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Tue Jan  3 02:19:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan  3 02:19:15 2012] rmf not generated due to insufficient counts
[Tue Jan  3 08:18:07 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:07 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Jan  3 08:18:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:10 2012] Using photon index=1.80, rate=0.0517, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src70.arf
[Tue Jan  3 08:18:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:10 2012] Updating source flux to 1.1e-12
[Tue Jan  3 08:18:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting