[Sun Jan  1 03:29:25 2012] Detection parameters:
  Position = (235.3, 205.1) = 5 34 47.41 21 55 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.7 +/- 22.8
  Background counts = 202.2
  Rate = 0.07 +/- 0.006

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 8.17'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.881
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.51"
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3.csv
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3.csv
[Sun Jan  1 13:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jan  1 13:24:17 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jan  1 13:24:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jan  1 13:24:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:58:30 2012] Spatial fit model total counts = 1611.610000, observed total counts = 1905.000000
[Sun Jan  1 23:58:30 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:59:16 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Sun Jan  1 23:59:16 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.881
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.51"
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jan  2 09:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3.csv
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jan  2 09:16:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3.csv
[Mon Jan  2 09:16:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jan  2 09:16:37 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jan  2 22:43:59 2012] Warning, spatial fit 3 centroid is now closest to src. 57
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 22:44:51 2012] XMMSAS src. selection expression = ellipse(20419.188553, 17795.257614, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 22:44:51 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5_src.reg
[Mon Jan  2 22:44:51 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (198, 168) - (273, 243)
[Mon Jan  2 22:44:51 2012] XMMSAS bgd. selection expression = annulus(20419.188553, 17795.257614, 1087.500000, 2175.000000, X, Y) && !ellipse(22486.228000, 17757.382000, 1633.616047, 826.488024, 6.254000, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(19121.840000, 17737.403800, 1726.320050, 1726.320050, 0.000000, X, Y) && !ellipse(22878.007202, 17363.249832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.219345, 17706.251740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18311.062075, 18006.229708, 1765.040051, 1287.499969, 11.101650, X, Y) && !ellipse(18310.324005, 17132.574249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20062.130000, 16811.166000, 1286.672037, 1286.672037, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24223.702000, 13266.022000, 2738.160079, 2738.160079, 0.000000, X, Y)
[Mon Jan  2 22:44:51 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5.gif
[Mon Jan  2 22:57:06 2012] Mean detx,y = (7084.93, 3732.41) 
[Mon Jan  2 22:57:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 22:57:29 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 22:57:30 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jan  2 22:57:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Jan  3 00:39:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan  3 00:39:37 2012] rmf not generated due to insufficient counts
[Tue Jan  3 08:18:03 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:03 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jan  3 08:18:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:07 2012] Using photon index=1.80, rate=0.0732, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src5.arf
[Tue Jan  3 08:18:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:07 2012] Updating source flux to 1.3e-12
[Tue Jan  3 08:18:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting