[Sun Jan  1 03:29:27 2012] Detection parameters:
  Position = (375.0, 284.6) = 5 34 3.71 22 1 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.0 +/- 20.6
  Background counts = 174.2
  Rate = 0.02 +/- 0.005

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 5.64'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 9.25"
[Sun Jan  1 13:24:16 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32.ximg exists
[Sun Jan  1 13:24:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32.csv
[Sun Jan  1 13:24:16 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Jan  1 13:24:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32.csv
[Sun Jan  1 13:24:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:18 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Jan  1 13:24:18 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Jan  1 13:24:18 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sun Jan  1 23:58:30 2012] Spatial fit model total counts = 2150.910000, observed total counts = 2154.000000
[Sun Jan  1 23:58:30 2012] Offset between fit and detection position for source 40 = 4.668112 pixels
[Sun Jan  1 23:58:30 2012] 2137.447000 total counts/ 1492.660000 bgd. counts: snr = 16.689212
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.668112 pixels
  Position = (378.9, 282.0) = 5 34 2.50 22 1 4.6
  Extent = 18.5 (18.4-37.0)", rotation angle = 0
  Source counts = 644.8 +/- 46.2
  Background counts = 1492.7
  Rate = 0.1 +/- 0.007
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:59:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 18.50"
[Sun Jan  1 23:59:16 2012] source mask rpix=4.3, npix_max = 90, mask sum = 86, frac = 0.952
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 18.50"
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src28.ximg exists
[Mon Jan  2 09:16:36 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Jan  2 09:16:36 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src28 appears to have run properly
[Mon Jan  2 09:16:38 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Jan  2 09:16:38 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Jan  2 09:16:38 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Jan  2 22:43:59 2012] Spatial fit model total counts = 4864.080000, observed total counts = 4868.000000
[Mon Jan  2 22:43:59 2012] Offset between fit and detection position for source 40 = 2.586604 pixels
[Mon Jan  2 22:43:59 2012] 4690.982000 total counts/ 4418.140000 bgd. counts: snr = 4.104795
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.586604 pixels
  Position = (380.1, 284.3) = 5 34 2.13 22 1 14.6
  Extent = 37.0 (26.8-74.0)" x 10.6 (7.7-16.0)", rotation angle = 359 (348-13) degrees
  Source counts = 272.8 +/- 68.5
  Background counts = 4418.1
  Rate = 0.04 +/- 0.01
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68
[Mon Jan  2 22:43:59 2012] Source is asymmetric
[Mon Jan  2 22:44:00 2012] Source is confused with source 2
[Mon Jan  2 22:44:00 2012] Source is confused with source 31
[Mon Jan  2 22:44:00 2012] Source is confused with source 32
[Mon Jan  2 22:44:00 2012] Source is confused with source 33
[Mon Jan  2 22:44:00 2012] Source is confused with source 37
[Mon Jan  2 22:44:00 2012] Source is confused with source 38
[Mon Jan  2 22:44:00 2012] Source is confused with source 41
[Mon Jan  2 22:44:00 2012] Source is confused with source 42
[Mon Jan  2 22:44:00 2012] Source is confused with source 44
[Mon Jan  2 22:44:54 2012] XMMSAS src. selection expression = ellipse(33015.885000, 24684.708000, 2219.820064, 634.800018, 358.599230, X, Y)
[Mon Jan  2 22:44:54 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40_src.reg
[Mon Jan  2 22:44:54 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (252, 157) - (508, 412)
[Mon Jan  2 22:44:54 2012] XMMSAS bgd. selection expression = annulus(33015.885000, 24684.708000, 3699.700106, 7399.400213, X, Y) && !ellipse(25824.187012, 17527.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.455902, 25619.919678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.002655, 21958.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.647552, 17540.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(31489.000000, 29724.045380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31845.362000, 28886.992000, 999.680029, 999.680029, 0.000000, X, Y) && !ellipse(32220.471191, 28407.777435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32300.076935, 27935.208771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32514.728088, 27435.919891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31589.434448, 26558.342438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32686.144745, 26465.233215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.086365, 26322.382019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.002655, 26142.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32784.336000, 25667.874200, 1449.176042, 1449.176042, 0.000000, X, Y) && !ellipse(31492.748901, 25103.959869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31493.911804, 24567.458099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.002655, 23793.386963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31774.901520, 23351.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 22929.668762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31835.476013, 22492.308441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.220520, 21246.443909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31664.269104, 21176.967102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32644.941345, 20384.509888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31302.420471, 20130.418274, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 22:44:54 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40.gif
[Mon Jan  2 23:34:53 2012] Mean detx,y = (-530.31, -8365.36) 
[Mon Jan  2 23:34:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 23:37:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 23:37:02 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Jan  2 23:37:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Jan  3 08:18:05 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:05 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Jan  3 08:18:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:09 2012] Using photon index=1.80, rate=0.0404, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src40.arf
[Tue Jan  3 08:18:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:09 2012] Updating source flux to 7.5e-13
[Tue Jan  3 08:18:20 2012] Flag c found in src. 40 procflags, skipping spectral fitting