[Sun Jan  1 03:29:25 2012] Detection parameters:
  Position = (279.9, 140.1) = 5 34 33.44 21 50 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.1 +/- 22.6
  Background counts = 84.2
  Rate = 0.03 +/- 0.003

[Sun Jan  1 03:29:29 2012] Off-axis axis estimate = 11.56'
[Sun Jan  1 03:34:17 2012] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:34:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 03:34:17 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Sun Jan  1 03:34:17 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.823
[Sun Jan  1 03:34:17 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.21"
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8.csv
[Sun Jan  1 13:24:15 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jan  1 13:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8.csv
[Sun Jan  1 13:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:24:18 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jan  1 13:24:18 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jan  1 13:24:18 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Jan  1 23:58:30 2012] Warning, spatial fit 8 centroid is now closest to src. 75
[Sun Jan  1 23:58:30 2012] Spatial fit model total counts = 1899.370000, observed total counts = 1901.000000
[Sun Jan  1 23:58:30 2012] Offset between fit and detection position for source 10 = 3.182484 pixels
[Sun Jan  1 23:58:30 2012] Warning, changing simple spatial fit ID from 8 to 63
[Sun Jan  1 23:58:30 2012] 1878.029000 total counts/ 1586.600000 bgd. counts: snr = 7.316427
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.182484 pixels
  Position = (278.4, 137.3) = 5 34 33.91 21 50 35.4
  Extent = 24.8 (24.6-49.6)", rotation angle = 0
  Source counts = 291.4 +/- 43.3
  Background counts = 1586.6
  Rate = 0.04 +/- 0.006
[Sun Jan  1 23:58:30 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 23:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 23:58:30 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 23:58:30 2012] Source does appear to be extended
[Sun Jan  1 23:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 23:58:30 2012] Source is confused with source 11
[Sun Jan  1 23:58:30 2012] Source is confused with source 12
[Sun Jan  1 23:58:30 2012] Source is confused with source 70
[Sun Jan  1 23:58:30 2012] Source is confused with source 71
[Sun Jan  1 23:58:30 2012] Source is confused with source 73
[Sun Jan  1 23:58:30 2012] Source is confused with source 74
[Sun Jan  1 23:58:30 2012] Source is confused with source 75
[Sun Jan  1 23:59:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:59:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 23:59:16 2012] Initial guess for spatial extent in simple fitting = 24.80"
[Sun Jan  1 23:59:16 2012] source mask rpix=5.7, npix_max = 153, mask sum = 169, frac = 1.099
[Sun Jan  1 23:59:16 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 24.80"
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jan  2 09:16:35 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jan  2 09:16:35 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_src7 appears to have run properly
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jan  2 09:16:37 2012] fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jan  2 09:16:37 2012] Fit fullrun_mos1_xmm0412592001_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jan  2 22:43:59 2012] Warning, spatial fit 7 centroid is now closest to src. 74
[Mon Jan  2 22:43:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 22:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 22:43:59 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 22:43:59 2012] Source does appear to be extended
[Mon Jan  2 22:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 22:44:52 2012] XMMSAS src. selection expression = ellipse(24173.776000, 11897.020400, 1488.066043, 1488.066043, 0.000000, X, Y)
[Mon Jan  2 22:44:52 2012] Writing source region out to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10_src.reg
[Mon Jan  2 22:44:52 2012] Extracting stamp from image fullrun_mos1_xmm0412592001_pi300-10000_cl_sm2.00.img.gz, (193, 52) - (364, 223)
[Mon Jan  2 22:44:52 2012] XMMSAS bgd. selection expression = annulus(24173.776000, 11897.020400, 2480.110071, 4960.220143, X, Y) && !ellipse(25824.187012, 17527.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.228000, 17757.382000, 1633.616047, 826.488024, 6.254000, X, Y) && !ellipse(25438.647552, 17540.495605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24228.394928, 17572.195328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.962000, 17097.362000, 2378.544068, 2378.544068, 0.000000, X, Y) && !ellipse(24227.748800, 10960.134000, 3198.016092, 2318.392067, 270.128000, X, Y) && !ellipse(24232.030000, 10507.404000, 2106.072061, 2106.072061, 0.000000, X, Y) && !ellipse(24136.591200, 8762.755280, 2322.920067, 1187.008034, 89.657000, X, Y) && !ellipse(19121.840000, 17737.403800, 1726.320050, 1726.320050, 0.000000, X, Y) && !ellipse(22878.007202, 17363.249832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.219345, 17706.251740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18311.062075, 18006.229708, 1765.040051, 1287.499969, 11.101650, X, Y) && !ellipse(20062.130000, 16811.166000, 1286.672037, 1286.672037, 0.000000, X, Y) && !ellipse(23425.856000, 16099.562000, 1676.152048, 1676.152048, 0.000000, X, Y) && !ellipse(24533.234800, 15458.795200, 1382.352040, 1382.352040, 0.000000, X, Y) && !ellipse(23966.293091, 15000.427750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.005035, 14483.674088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.392029, 13706.947922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.799800, 13601.942000, 1891.792054, 1891.792054, 0.000000, X, Y) && !ellipse(24658.966339, 13265.408585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.702000, 13266.022000, 2738.160079, 2738.160079, 0.000000, X, Y) && !ellipse(24119.668000, 11359.606000, 1891.792054, 1522.464044, 90.000000, X, Y) && !ellipse(24319.387864, 12377.294939, 3198.016092, 2316.547709, 277.026291, X, Y) && !ellipse(24742.265600, 11458.926000, 2489.688072, 1329.328038, 102.280000, X, Y) && !ellipse(23961.163574, 9871.543709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.634094, 10134.712204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.093872, 7789.760460, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan  2 22:44:52 2012] Writing fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10.gif
[Mon Jan  2 22:59:32 2012] Mean detx,y = (12639.28, -358.25) 
[Mon Jan  2 22:59:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 23:00:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 23:00:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 23:00:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jan  3 08:18:04 2012] Updating aperture counts using extracted products
[Tue Jan  3 08:18:04 2012] Error reading totcts from fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jan  3 08:18:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 08:18:08 2012] Using photon index=1.80, rate=0.0432, arf fullrun_mos1_xmm0412592001_pi300-10000_pass1_cl_src10.arf
[Tue Jan  3 08:18:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 08:18:08 2012] Updating source flux to 8.8e-13
[Tue Jan  3 08:18:20 2012] Flag c found in src. 10 procflags, skipping spectral fitting