[Thu May  3 05:48:11 2012] Detection parameters:
  Position = (273.1, 129.2) = 5 34 35.58 21 50 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.2 +/- 19.4
  Background counts = 51.1
  Rate = 0.02 +/- 0.003

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 12.41'
[Thu May  3 12:28:10 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Thu May  3 12:28:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.035
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 12.63"
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Thu May  3 23:11:42 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Thu May  3 23:12:38 2012] Spatial fit model total counts = 1771.110000, observed total counts = 1768.000000
[Thu May  3 23:12:38 2012] Offset between fit and detection position for source 91 = 8.954285 pixels
[Thu May  3 23:12:38 2012] 1708.508000 total counts/ 1287.040000 bgd. counts: snr = 11.748126
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 8.954285 pixels
  Position = (267.9, 136.4) = 5 34 37.21 21 50 33.0
  Extent = 25.3 (25.2-50.5)", rotation angle = 0
  Source counts = 421.5 +/- 41.3
  Background counts = 1287.0
  Rate = 0.07 +/- 0.007
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 17
[Fri May  4 06:29:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 25.27"
[Fri May  4 06:29:44 2012] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.980
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 25.27"
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:01 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Fri May  4 18:53:01 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Fri May  4 18:53:01 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Fri May  4 18:53:55 2012] Warning, spatial fit 71 centroid is now closest to src. 19
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major axis lower bound
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:52 2012] XMMSAS src. selection expression = ellipse(23259.676000, 11821.810000, 1516.002044, 1516.002044, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91_src.reg
[Fri May  4 21:17:52 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (181, 49) - (355, 224)
[Fri May  4 21:17:52 2012] XMMSAS bgd. selection expression = annulus(23259.676000, 11821.810000, 2526.670073, 5053.340145, X, Y) && !ellipse(24542.824600, 17226.658000, 1648.472047, 312.005609, 263.023000, X, Y) && !ellipse(24491.829940, 15107.510000, 595.116817, 595.116817, 0.000000, X, Y) && !ellipse(24067.001007, 17369.263474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.656000, 16214.014200, 1692.776049, 512.399215, 97.711300, X, Y) && !ellipse(24535.620000, 13354.820000, 741.544021, 741.544021, 0.000000, X, Y) && !ellipse(24543.746033, 16718.785278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.059570, 9956.852455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.472000, 17537.944560, 1644.176047, 1644.176047, 0.000000, X, Y) && !ellipse(24278.580292, 9082.855309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.980000, 12136.782000, 1940.464056, 242.557607, 94.330000, X, Y) && !ellipse(24658.430800, 13633.228200, 1177.664034, 1177.664034, 0.000000, X, Y) && !ellipse(24956.872000, 16318.572000, 1248.304036, 1248.304036, 0.000000, X, Y) && !ellipse(24171.333038, 7913.861839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.360000, 15706.930000, 946.424027, 946.424027, 0.000000, X, Y) && !ellipse(23981.894043, 8307.767296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.951019, 14221.168686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.592194, 14931.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.036774, 11346.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.198242, 16904.333328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.962494, 13079.837967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.309479, 12395.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23675.073547, 10814.918098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.763031, 14725.224670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.513824, 9180.444893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.778600, 11483.080400, 1991.944057, 811.776023, 96.955460, X, Y) && !ellipse(23894.825012, 15423.022125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.636000, 17145.052000, 990.392028, 990.392028, 0.000000, X, Y) && !ellipse(22587.976000, 8177.252000, 1980.784057, 1362.560039, 324.027000, X, Y) && !ellipse(23831.672485, 7849.777397, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91.gif
[Fri May  4 22:00:29 2012] Mean detx,y = (-380.64, 12529.35) 
[Fri May  4 22:00:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 22:01:26 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 22:01:26 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Fri May  4 22:01:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sat May  5 00:45:10 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:10 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sat May  5 00:45:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:17 2012] Using photon index=1.80, rate=0.0708, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src91.arf
[Sat May  5 00:45:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:17 2012] Updating source flux to 1.7e-12
[Sat May  5 00:51:41 2012] Flag c found in src. 91 procflags, skipping spectral fitting