[Thu May  3 05:48:02 2012] Detection parameters:
  Position = (277.2, 200.2) = 5 34 34.31 21 55 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 329.9 +/- 24.2
  Background counts = 176.7
  Rate = 0.1 +/- 0.007

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 7.29'
[Thu May  3 12:28:10 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Thu May  3 12:28:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.978
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.07"
[Thu May  3 23:11:36 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  3 23:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3.csv
[Thu May  3 23:11:36 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  3 23:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3.csv
[Thu May  3 23:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 8
[Fri May  4 06:29:44 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May  4 06:29:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.978
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.07"
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2.csv
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2.csv
[Fri May  4 18:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:54 2012] Spatial fit model total counts = 3016.480000, observed total counts = 2169.000000
[Fri May  4 18:53:54 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:48 2012] XMMSAS src. selection expression = ellipse(24067.001007, 17369.263474, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9_src.reg
[Fri May  4 21:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (240, 163) - (315, 238)
[Fri May  4 21:17:48 2012] XMMSAS bgd. selection expression = annulus(24067.001007, 17369.263474, 1087.500000, 2175.000000, X, Y) && !ellipse(24542.824600, 17226.658000, 1648.472047, 312.005609, 263.023000, X, Y) && !ellipse(24491.829940, 15107.510000, 595.116817, 595.116817, 0.000000, X, Y) && !ellipse(24618.656000, 16214.014200, 1692.776049, 512.399215, 97.711300, X, Y) && !ellipse(24543.746033, 16718.785278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.472000, 17537.944560, 1644.176047, 1644.176047, 0.000000, X, Y) && !ellipse(24956.872000, 16318.572000, 1248.304036, 1248.304036, 0.000000, X, Y) && !ellipse(23639.360000, 15706.930000, 946.424027, 946.424027, 0.000000, X, Y) && !ellipse(24995.592194, 14931.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.198242, 16904.333328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.763031, 14725.224670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23894.825012, 15423.022125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25459.636000, 17145.052000, 990.392028, 990.392028, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9.gif
[Fri May  4 21:19:30 2012] Mean detx,y = (-135.33, 7065.72) 
[Fri May  4 21:19:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:19:55 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:19:55 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri May  4 21:19:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri May  4 22:21:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 22:21:34 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:05 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:05 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May  5 00:45:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:11 2012] Using photon index=1.80, rate=0.0998, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src9.arf
[Sat May  5 00:45:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:11 2012] Updating source flux to 2.1e-12
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting