[Thu May  3 05:48:10 2012] Detection parameters:
  Position = (275.5, 181.9) = 5 34 34.84 21 53 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.6 +/- 23.6
  Background counts = 151.1
  Rate = 0.05 +/- 0.007

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 8.61'
[Thu May  3 12:28:10 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Thu May  3 12:28:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.852
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.73"
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31.csv
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31.csv
[Thu May  3 23:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May  3 23:11:40 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 2795.200000, observed total counts = 2824.000000
[Thu May  3 23:12:37 2012] Offset between fit and detection position for source 83 = 3.322743 pixels
[Thu May  3 23:12:37 2012] Warning, changing simple spatial fit ID from 31 to 5
[Thu May  3 23:12:37 2012] 2689.944900 total counts/ 2594.940000 bgd. counts: snr = 1.865015
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 3.322743 pixels
  Position = (272.3, 181.1) = 5 34 35.85 21 53 47.3
  Extent = 11.8 (7.0-17.0)", rotation angle = 0
  Source counts = 95.0 +/- 51.9
  Background counts = 2594.9
  Rate = 0.02 +/- 0.009
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 84
[Fri May  4 06:29:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Fri May  4 06:29:44 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.83"
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29.csv
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29.csv
[Fri May  4 18:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri May  4 18:52:58 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri May  4 18:53:55 2012] Warning, spatial fit 29 centroid is now closest to src. 82
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major axis lower bound
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:49 2012] XMMSAS src. selection expression = ellipse(23639.360000, 15706.930000, 709.818020, 709.818020, 0.000000, X, Y)
[Fri May  4 21:17:49 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83_src.reg
[Fri May  4 21:17:49 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (231, 140) - (313, 222)
[Fri May  4 21:17:49 2012] XMMSAS bgd. selection expression = annulus(23639.360000, 15706.930000, 1183.030034, 2366.060068, X, Y) && !ellipse(24542.824600, 17226.658000, 1648.472047, 312.005609, 263.023000, X, Y) && !ellipse(24491.829940, 15107.510000, 595.116817, 595.116817, 0.000000, X, Y) && !ellipse(24067.001007, 17369.263474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.656000, 16214.014200, 1692.776049, 512.399215, 97.711300, X, Y) && !ellipse(24535.620000, 13354.820000, 741.544021, 741.544021, 0.000000, X, Y) && !ellipse(24543.746033, 16718.785278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.472000, 17537.944560, 1644.176047, 1644.176047, 0.000000, X, Y) && !ellipse(24195.980000, 12136.782000, 1940.464056, 242.557607, 94.330000, X, Y) && !ellipse(24658.430800, 13633.228200, 1177.664034, 1177.664034, 0.000000, X, Y) && !ellipse(24956.872000, 16318.572000, 1248.304036, 1248.304036, 0.000000, X, Y) && !ellipse(24552.951019, 14221.168686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.592194, 14931.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.198242, 16904.333328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.962494, 13079.837967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.763031, 14725.224670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.778600, 11483.080400, 1991.944057, 811.776023, 96.955460, X, Y) && !ellipse(23894.825012, 15423.022125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23259.676000, 11821.810000, 2021.336058, 2021.336058, 0.000000, X, Y) && !ellipse(25459.636000, 17145.052000, 990.392028, 990.392028, 0.000000, X, Y)
[Fri May  4 21:17:49 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83.gif
[Fri May  4 21:35:45 2012] Mean detx,y = (-493.46, 8653.10) 
[Fri May  4 21:35:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:36:08 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:36:08 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Fri May  4 21:36:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Fri May  4 23:17:52 2012] Not generating rmf since there are only 95 counts
[Fri May  4 23:17:52 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:07 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:07 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat May  5 00:45:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:13 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src83.arf
[Sat May  5 00:45:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:13 2012] Updating source flux to 3.3e-13
[Sat May  5 00:51:41 2012] Flag c found in src. 83 procflags, skipping spectral fitting
[Sat May  5 00:51:41 2012] Source 83 has fewer than 100.000000 counts, skipping spectral fitting