[Thu May  3 05:48:09 2012] Detection parameters:
  Position = (291.7, 193.1) = 5 34 29.76 21 54 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.2 +/- 19.4
  Background counts = 188.2
  Rate = 0.02 +/- 0.003

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 7.65'
[Thu May  3 12:28:10 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Thu May  3 12:28:10 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.918
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 10.26"
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src79.ximg exists
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu May  3 23:11:39 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src79 appears to have run properly
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu May  3 23:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 2687.230000, observed total counts = 2712.000000
[Thu May  3 23:12:37 2012] Offset between fit and detection position for source 80 = 4.770398 pixels
[Thu May  3 23:12:37 2012] Warning, changing simple spatial fit ID from 79 to 28
[Thu May  3 23:12:37 2012] 2606.910000 total counts/ 2499.540000 bgd. counts: snr = 2.147598
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 4.770398 pixels
  Position = (293.2, 197.6) = 5 34 29.31 21 54 59.2
  Extent = 12.4 (7.9-18.7)", rotation angle = 0
  Source counts = 107.4 +/- 51.1
  Background counts = 2499.5
  Rate = 0.02 +/- 0.009
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 06:29:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Fri May  4 06:29:44 2012] source mask rpix=2.8, npix_max = 44, mask sum = 26, frac = 0.581
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 12.38"
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:01 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Fri May  4 18:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri May  4 18:53:01 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Fri May  4 18:53:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74.csv
[Fri May  4 18:53:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:55 2012] Source 80 is offset by -0.301701 and 3.331586 pixels which is larger than
2 X fitted extent = 6.315448 x 1.203379, not incorporating fit results
[Fri May  4 18:53:55 2012] Warning, spatial fit 74 centroid is now closest to src. 85
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major axis lower bound
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:53:55 2012] Source is confused with source 11
[Fri May  4 21:17:52 2012] XMMSAS src. selection expression = ellipse(25459.636000, 17145.052000, 742.794021, 742.794021, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80_src.reg
[Fri May  4 21:17:52 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (251, 155) - (336, 240)
[Fri May  4 21:17:52 2012] XMMSAS bgd. selection expression = annulus(25459.636000, 17145.052000, 1237.990036, 2475.980071, X, Y) && !ellipse(24542.824600, 17226.658000, 1648.472047, 312.005609, 263.023000, X, Y) && !ellipse(24491.829940, 15107.510000, 595.116817, 595.116817, 0.000000, X, Y) && !ellipse(24067.001007, 17369.263474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.656000, 16214.014200, 1692.776049, 512.399215, 97.711300, X, Y) && !ellipse(24543.746033, 16718.785278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.472000, 17537.944560, 1644.176047, 1644.176047, 0.000000, X, Y) && !ellipse(24658.430800, 13633.228200, 1177.664034, 1177.664034, 0.000000, X, Y) && !ellipse(24956.872000, 16318.572000, 1248.304036, 1248.304036, 0.000000, X, Y) && !ellipse(23639.360000, 15706.930000, 946.424027, 946.424027, 0.000000, X, Y) && !ellipse(24552.951019, 14221.168686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.592194, 14931.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.198242, 16904.333328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.763031, 14725.224670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23894.825012, 15423.022125, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80.gif
[Fri May  4 22:02:57 2012] Mean detx,y = (1137.66, 7131.18) 
[Fri May  4 22:02:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 22:03:22 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 22:03:22 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri May  4 22:03:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat May  5 00:45:10 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:10 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Sat May  5 00:45:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:17 2012] Using photon index=1.80, rate=0.018, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src80.arf
[Sat May  5 00:45:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:17 2012] Updating source flux to 4.2e-13
[Sat May  5 00:51:41 2012] Flag b found in src. 80 procflags, skipping spectral fitting
[Sat May  5 00:51:41 2012] Flag c found in src. 80 procflags, skipping spectral fitting