[Thu May  3 05:48:02 2012] Detection parameters:
  Position = (283.9, 202.0) = 5 34 32.20 21 55 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 468.7 +/- 27.8
  Background counts = 203.7
  Rate = 0.1 +/- 0.008

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 7.07'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu May  3 12:28:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.931
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.96"
[Thu May  3 23:11:36 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  3 23:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1.csv
[Thu May  3 23:11:36 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  3 23:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1.csv
[Thu May  3 23:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Warning, spatial fit 1 centroid is now closest to src. 82
[Thu May  3 23:12:37 2012] Source 8 is offset by -2.334347 and -8.291470 pixels which is larger than
2 X fitted extent = 1.157683 x 1.157683, not incorporating fit results
[Thu May  3 23:12:38 2012] Spatial fit model total counts = 2808.150000, observed total counts = 2727.000000
[Thu May  3 23:12:38 2012] Offset between fit and detection position for source 8 = 4.413797 pixels
[Thu May  3 23:12:38 2012] Warning, changing simple spatial fit ID from 1 to 44
[Thu May  3 23:12:38 2012] 2762.146000 total counts/ 2555.210000 bgd. counts: snr = 4.093764
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.413797 pixels
  Position = (282.6, 197.8) = 5 34 32.63 21 54 59.8
  Extent = 15.3 (11.4-20.5)" x 3.5 (2.6-5.5)", rotation angle = 86 (76-103) degrees
  Source counts = 206.9 +/- 52.6
  Background counts = 2555.2
  Rate = 0.03 +/- 0.009
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.07
[Thu May  3 23:12:38 2012] Source is asymmetric
[Thu May  3 23:12:38 2012] Source is confused with source 9
[Thu May  3 23:12:38 2012] Source is confused with source 81
[Thu May  3 23:12:38 2012] Source is confused with source 82
[Fri May  4 06:29:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Fri May  4 06:29:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 11, frac = 0.386
[Fri May  4 06:29:44 2012] Skipping simple spatial due to low active detector fraction
[Fri May  4 18:53:54 2012] Spatial fit model total counts = 3036.660000, observed total counts = 2847.000000
[Fri May  4 18:53:54 2012] Offset between fit and detection position for source 8 = 0.798806 pixels
[Fri May  4 18:53:54 2012] Warning, changing simple spatial fit ID from -1 to 8
[Fri May  4 18:53:54 2012] 2979.533000 total counts/ 2777.000000 bgd. counts: snr = 3.843332
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.798806 pixels
  Position = (282.7, 198.6) = 5 34 32.60 21 55 3.3
  Extent = 20.6 (16.1-41.2)" x 3.9 (2.6-5.7)", rotation angle = 263 (256-276) degrees
  Source counts = 202.5 +/- 54.6
  Background counts = 2777.0
  Rate = 0.03 +/- 0.009
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major axis lower bound
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.80
[Fri May  4 18:53:55 2012] Source is asymmetric
[Fri May  4 21:17:48 2012] XMMSAS src. selection expression = ellipse(24542.824600, 17226.658000, 1236.354036, 234.004207, 263.023000, X, Y)
[Fri May  4 21:17:48 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_src.reg
[Fri May  4 21:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (212, 128) - (354, 270)
[Fri May  4 21:17:48 2012] XMMSAS bgd. selection expression = annulus(24542.824600, 17226.658000, 2060.590059, 4121.180119, X, Y) && !ellipse(24491.829940, 15107.510000, 595.116817, 595.116817, 0.000000, X, Y) && !ellipse(24067.001007, 17369.263474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.656000, 16214.014200, 1692.776049, 512.399215, 97.711300, X, Y) && !ellipse(24535.620000, 13354.820000, 741.544021, 741.544021, 0.000000, X, Y) && !ellipse(24543.746033, 16718.785278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.472000, 17537.944560, 1644.176047, 1644.176047, 0.000000, X, Y) && !ellipse(24195.980000, 12136.782000, 1940.464056, 242.557607, 94.330000, X, Y) && !ellipse(24658.430800, 13633.228200, 1177.664034, 1177.664034, 0.000000, X, Y) && !ellipse(24956.872000, 16318.572000, 1248.304036, 1248.304036, 0.000000, X, Y) && !ellipse(23639.360000, 15706.930000, 946.424027, 946.424027, 0.000000, X, Y) && !ellipse(24552.951019, 14221.168686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.592194, 14931.947906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.198242, 16904.333328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.962494, 13079.837967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.309479, 12395.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.763031, 14725.224670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.778600, 11483.080400, 1991.944057, 811.776023, 96.955460, X, Y) && !ellipse(23894.825012, 15423.022125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23259.676000, 11821.810000, 2021.336058, 2021.336058, 0.000000, X, Y) && !ellipse(25459.636000, 17145.052000, 990.392028, 990.392028, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8.gif
[Fri May  4 21:18:02 2012] Mean detx,y = (292.00, 7255.79) 
[Fri May  4 21:18:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:18:47 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:18:47 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri May  4 21:18:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat May  5 00:45:05 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:05 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat May  5 00:45:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:11 2012] Using photon index=1.80, rate=0.034, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8.arf
[Sat May  5 00:45:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:11 2012] Updating source flux to 1e-12
[Sat May  5 00:51:41 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Sat May  5 00:51:41 2012] Flag c found in src. 8 procflags, skipping spectral fitting
[Sat May  5 00:59:05 2012] Reading fit data from xmm0412591901/analysis//spectral/fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_pl.csv
[Sat May  5 00:59:05 2012] Spectral fit parameter nH value = 2.28932e+21
[Sat May  5 00:59:05 2012] Spectral fit parameter PhoIndex value = 2.11746
[Sat May  5 00:59:05 2012] Failed to get F(0.3-8.0) from xmm0412591901/analysis//spectral/fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Sat May  5 00:59:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:59:05 2012] Using Nh = 2.3e+21, photon index=2.12, rate=0.034, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src8.arf
[Sat May  5 00:59:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:59:05 2012] Updating source flux to 1e-12