[Thu May  3 05:48:08 2012] Detection parameters:
  Position = (370.3, 260.1) = 5 34 5.18 21 59 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.7 +/- 23.7
  Background counts = 184.0
  Rate = 0.06 +/- 0.007

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 5.91'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.38 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Thu May  3 12:28:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.885
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.38"
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13.csv
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13.csv
[Thu May  3 23:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May  3 23:11:39 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu May  3 23:12:37 2012] Warning, spatial fit 13 centroid is now closest to src. 71
[Thu May  3 23:12:37 2012] Source 69 is offset by 1.478831 and -0.581688 pixels which is larger than
2 X fitted extent = 1.365375 x 1.365375, not incorporating fit results
[Thu May  3 23:12:38 2012] Spatial fit model total counts = 2600.230000, observed total counts = 2640.000000
[Thu May  3 23:12:38 2012] Offset between fit and detection position for source 69 = 1.561065 pixels
[Thu May  3 23:12:38 2012] Warning, changing simple spatial fit ID from 13 to 56
[Thu May  3 23:12:38 2012] 2420.949000 total counts/ 2058.380000 bgd. counts: snr = 7.991492
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 1.561065 pixels
  Position = (370.9, 258.7) = 5 34 5.00 21 59 24.6
  Extent = 15.2 (9.4-18.8)", rotation angle = 0
  Source counts = 362.6 +/- 49.2
  Background counts = 2058.4
  Rate = 0.06 +/- 0.008
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 67
[Fri May  4 06:29:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 15.24"
[Fri May  4 06:29:44 2012] source mask rpix=3.5, npix_max = 64, mask sum = 58, frac = 0.905
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 15.24"
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11.csv
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11.csv
[Fri May  4 18:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May  4 18:52:58 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri May  4 18:53:54 2012] Warning, spatial fit 11 centroid is now closest to src. 65
[Fri May  4 18:53:55 2012] Spatial fit model total counts = 2582.310000, observed total counts = 2640.000000
[Fri May  4 18:53:55 2012] Offset between fit and detection position for source 69 = 2.376810 pixels
[Fri May  4 18:53:55 2012] Warning, changing simple spatial fit ID from 11 to 53
[Fri May  4 18:53:55 2012] 2008.321000 total counts/ 1720.170000 bgd. counts: snr = 6.947594
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 2.376810 pixels
  Position = (373.2, 259.4) = 5 34 4.29 21 59 27.7
  Extent = 15.4 (10.4-18.8)", rotation angle = 0
  Source counts = 288.2 +/- 44.8
  Background counts = 1720.2
  Rate = 0.05 +/- 0.008
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major axis lower bound
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:48 2012] XMMSAS src. selection expression = ellipse(32419.740000, 22517.714000, 926.958027, 926.958027, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69_src.reg
[Fri May  4 21:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (320, 206) - (426, 313)
[Fri May  4 21:17:48 2012] XMMSAS bgd. selection expression = annulus(32419.740000, 22517.714000, 1544.930044, 3089.860089, X, Y) && !ellipse(31796.189545, 25277.728882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31766.989532, 23183.332916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31566.956970, 24739.238495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31718.144958, 24137.584961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31388.111542, 21785.470612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.046000, 22108.324000, 1501.112043, 1501.112043, 0.000000, X, Y) && !ellipse(31702.713928, 26229.086945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31741.844000, 20040.914000, 1578.848045, 1578.848045, 0.000000, X, Y) && !ellipse(32232.684326, 25829.550171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32138.117493, 20492.397003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.138702, 24837.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.899261, 22157.337997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32657.522000, 21318.613000, 1549.496045, 1549.496045, 0.000000, X, Y) && !ellipse(32155.728302, 20070.998718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31322.866852, 22577.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.956543, 21000.909454, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69.gif
[Fri May  4 21:24:36 2012] Mean detx,y = (7797.88, 1404.58) 
[Fri May  4 21:24:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:24:58 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:24:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Fri May  4 21:24:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat May  5 00:45:06 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:06 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat May  5 00:45:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:11 2012] Using photon index=1.80, rate=0.0484, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src69.arf
[Sat May  5 00:45:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:11 2012] Updating source flux to 9.1e-13
[Sat May  5 00:51:41 2012] Flag b found in src. 69 procflags, skipping spectral fitting
[Sat May  5 00:51:41 2012] Flag c found in src. 69 procflags, skipping spectral fitting