[Thu May  3 05:48:08 2012] Detection parameters:
  Position = (365.7, 267.0) = 5 34 6.63 21 59 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.6 +/- 25.3
  Background counts = 189.3
  Rate = 0.08 +/- 0.007

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 5.38'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Thu May  3 12:28:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.927
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.12"
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7.csv
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7.csv
[Thu May  3 23:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Warning, spatial fit 7 centroid is now closest to src. 65
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 69
[Thu May  3 23:12:38 2012] Source is confused with source 71
[Fri May  4 06:29:44 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Fri May  4 06:29:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.927
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.12"
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6.csv
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6.csv
[Fri May  4 18:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:54 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Fri May  4 18:53:54 2012] Source 67 is offset by -8.259753 and -3.012403 pixels which is larger than
2 X fitted extent = 1.119379 x 1.119379, not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:48 2012] XMMSAS src. selection expression = ellipse(31766.989532, 23183.332916, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67_src.reg
[Fri May  4 21:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (328, 230) - (403, 305)
[Fri May  4 21:17:48 2012] XMMSAS bgd. selection expression = annulus(31766.989532, 23183.332916, 1087.500000, 2175.000000, X, Y) && !ellipse(31796.189545, 25277.728882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32419.740000, 22517.714000, 1235.944036, 1235.944036, 0.000000, X, Y) && !ellipse(31566.956970, 24739.238495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31718.144958, 24137.584961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31388.111542, 21785.470612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.046000, 22108.324000, 1501.112043, 1501.112043, 0.000000, X, Y) && !ellipse(31741.844000, 20040.914000, 1578.848045, 1578.848045, 0.000000, X, Y) && !ellipse(32232.684326, 25829.550171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32138.117493, 20492.397003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32326.138702, 24837.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.899261, 22157.337997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32657.522000, 21318.613000, 1549.496045, 1549.496045, 0.000000, X, Y) && !ellipse(31322.866852, 22577.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.956543, 21000.909454, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67.gif
[Fri May  4 21:21:59 2012] Mean detx,y = (7241.65, 758.76) 
[Fri May  4 21:22:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:22:17 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:22:18 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri May  4 21:22:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Fri May  4 22:30:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 22:30:13 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:05 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:05 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat May  5 00:45:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:11 2012] Using photon index=1.80, rate=0.0761, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src67.arf
[Sat May  5 00:45:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:11 2012] Updating source flux to 1.5e-12
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting