[Thu May  3 05:48:07 2012] Detection parameters:
  Position = (372.1, 286.0) = 5 34 4.62 22 1 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 24.0
  Background counts = 191.1
  Rate = 0.03 +/- 0.006

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 5.42'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Thu May  3 12:28:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.109
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 9.14"
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51.csv
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51.csv
[Thu May  3 23:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu May  3 23:11:41 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu May  3 23:12:37 2012] Source 61 is offset by -0.310107 and 1.661157 pixels which is larger than
2 X fitted extent = 1.022212 x 1.022212, not incorporating fit results
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 3557.230000, observed total counts = 2276.000000
[Thu May  3 23:12:37 2012] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:38 2012] Source 61 is offset by -0.803525 and -1.926545 pixels which is larger than
2 X fitted extent = 1.110658 x 1.110658, not incorporating fit results
[Thu May  3 23:12:38 2012] Warning, spatial fit 51 centroid is now closest to src. 65
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 65
[Fri May  4 06:29:44 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Fri May  4 06:29:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.109
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 9.14"
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src48.ximg exists
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src48_1.ximg exists
[Fri May  4 18:52:56 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src48 appears to have run properly
[Fri May  4 18:52:59 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Fri May  4 18:52:59 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Fri May  4 18:52:59 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Fri May  4 18:53:55 2012] Source 61 is offset by -7.951555 and -2.882338 pixels which is larger than
2 X fitted extent = 1.134230 x 5.327750, not incorporating fit results
[Fri May  4 18:53:55 2012] Source 61 is offset by -8.020452 and 5.032628 pixels which is larger than
2 X fitted extent = 1.052152 x 1.052152, not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:50 2012] XMMSAS src. selection expression = ellipse(32326.138702, 24837.312622, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:50 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61_src.reg
[Fri May  4 21:17:50 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (335, 249) - (410, 324)
[Fri May  4 21:17:50 2012] XMMSAS bgd. selection expression = annulus(32326.138702, 24837.312622, 1087.500000, 2175.000000, X, Y) && !ellipse(31796.189545, 25277.728882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31766.989532, 23183.332916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32419.740000, 22517.714000, 1235.944036, 1235.944036, 0.000000, X, Y) && !ellipse(31566.956970, 24739.238495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31718.144958, 24137.584961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.046000, 22108.324000, 1501.112043, 1501.112043, 0.000000, X, Y) && !ellipse(31702.713928, 26229.086945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.684326, 25829.550171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.899261, 22157.337997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31976.949249, 26748.001801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32657.522000, 21318.613000, 1549.496045, 1549.496045, 0.000000, X, Y) && !ellipse(31322.866852, 22577.946411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.005310, 27265.536041, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:50 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61.gif
[Fri May  4 21:46:05 2012] Mean detx,y = (7606.16, -888.00) 
[Fri May  4 21:46:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:46:23 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:46:23 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri May  4 21:46:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri May  4 23:39:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 23:39:19 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:08 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:08 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat May  5 00:45:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:14 2012] Using photon index=1.80, rate=0.0348, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src61.arf
[Sat May  5 00:45:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:15 2012] Updating source flux to 6.5e-13
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting