[Thu May  3 05:48:07 2012] Detection parameters:
  Position = (206.3, 294.2) = 5 34 56.51 22 1 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.3 +/- 21.1
  Background counts = 194.4
  Rate = 0.05 +/- 0.006

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 6.69'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Thu May  3 12:28:10 2012] source mask rpix=2.2, npix_max = 30, mask sum = 19, frac = 0.630
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.77"
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23.csv
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23.csv
[Thu May  3 23:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May  3 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May  3 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu May  3 23:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Source 59 is offset by -9.700396 and -1.883711 pixels which is larger than
2 X fitted extent = 8.955035 x 8.955035, not incorporating fit results
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 3039.080000, observed total counts = 1954.000000
[Thu May  3 23:12:37 2012] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 06:29:44 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May  4 06:29:44 2012] source mask rpix=2.2, npix_max = 30, mask sum = 19, frac = 0.630
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.77"
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21.csv
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21.csv
[Fri May  4 18:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri May  4 18:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri May  4 18:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri May  4 18:52:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:54 2012] Source 59 is offset by -9.700396 and -1.883711 pixels which is larger than
2 X fitted extent = 1.119379 x 1.119379, not incorporating fit results
[Fri May  4 18:53:55 2012] Warning, spatial fit 21 centroid is now closest to src. 63
[Fri May  4 18:53:55 2012] Source 59 is offset by 9.280731 and 1.135163 pixels which is larger than
2 X fitted extent = 1.128262 x 1.128262, not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:49 2012] XMMSAS src. selection expression = ellipse(17895.653564, 25543.529175, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:49 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59_src.reg
[Fri May  4 21:17:49 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (169, 257) - (244, 332)
[Fri May  4 21:17:49 2012] XMMSAS bgd. selection expression = annulus(17895.653564, 25543.529175, 1087.500000, 2175.000000, X, Y) && !ellipse(17986.561768, 26405.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17810.221359, 23359.159576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17896.549637, 24579.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.971405, 28555.251038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17112.345600, 26571.378000, 1618.184047, 1618.184047, 0.000000, X, Y) && !ellipse(18093.859467, 27357.081451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17266.661194, 24580.220825, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:49 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59.gif
[Fri May  4 21:31:17 2012] Mean detx,y = (-6979.35, -819.16) 
[Fri May  4 21:31:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:31:42 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:31:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri May  4 21:31:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri May  4 23:00:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 23:00:45 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:07 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:07 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Sat May  5 00:45:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:12 2012] Using photon index=1.80, rate=0.0501, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src59.arf
[Sat May  5 00:45:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:12 2012] Updating source flux to 1.2e-12
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting