[Thu May  3 05:48:05 2012] Detection parameters:
  Position = (205.3, 337.7) = 5 34 56.82 22 5 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.4 +/- 21.7
  Background counts = 188.9
  Rate = 0.03 +/- 0.005

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 7.33'
[Thu May  3 12:28:10 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Thu May  3 12:28:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 10.09"
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70.csv
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70.csv
[Thu May  3 23:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:38 2012] Spatial fit model total counts = 2378.100000, observed total counts = 1960.000000
[Thu May  3 23:12:38 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 06:29:44 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri May  4 06:29:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 10.09"
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65.csv
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65.csv
[Fri May  4 18:53:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:55 2012] Source 45 is offset by 6.242518 and 3.208169 pixels which is larger than
2 X fitted extent = 4.219540 x 1.134230, not incorporating fit results
[Fri May  4 18:53:55 2012] Spatial fit model total counts = 2364.990000, observed total counts = 1960.000000
[Fri May  4 18:53:55 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:52 2012] XMMSAS src. selection expression = ellipse(17813.171097, 29330.880676, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45_src.reg
[Fri May  4 21:17:52 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (168, 300) - (243, 375)
[Fri May  4 21:17:52 2012] XMMSAS bgd. selection expression = annulus(17813.171097, 29330.880676, 1087.500000, 2175.000000, X, Y) && !ellipse(17986.561768, 26405.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18071.971405, 28555.251038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17112.345600, 26571.378000, 1618.184047, 1618.184047, 0.000000, X, Y) && !ellipse(18093.859467, 27357.081451, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45.gif
[Fri May  4 21:56:37 2012] Mean detx,y = (-7135.37, -4586.91) 
[Fri May  4 21:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:57:08 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:57:08 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri May  4 21:57:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat May  5 00:11:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 00:11:04 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:10 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:10 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat May  5 00:45:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:16 2012] Using photon index=1.80, rate=0.0259, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src45.arf
[Sat May  5 00:45:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:16 2012] Updating source flux to 4.6e-13
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting