[Thu May  3 05:48:05 2012] Detection parameters:
  Position = (313.4, 363.0) = 5 34 22.99 22 6 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.0 +/- 24.3
  Background counts = 214.3
  Rate = 0.03 +/- 0.006

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 4.81'
[Thu May  3 12:28:10 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Thu May  3 12:28:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.172
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.83"
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59.csv
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59.csv
[Thu May  3 23:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu May  3 23:11:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu May  3 23:11:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59.csv
[Thu May  3 23:11:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:38 2012] Source 42 is offset by 0.776887 and -1.308527 pixels which is larger than
2 X fitted extent = 1.015890 x 1.015890, not incorporating fit results
[Thu May  3 23:12:38 2012] Warning, spatial fit 59 centroid is now closest to src. 44
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 41
[Fri May  4 06:29:44 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Fri May  4 06:29:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.172
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 8.83"
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56.csv
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56.csv
[Fri May  4 18:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri May  4 18:53:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:55 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 17.958253 pixels away
[Fri May  4 18:53:55 2012] Source 42 is offset by 0.791779 and -1.366031 pixels which is larger than
2 X fitted extent = 1.015113 x 1.015113, not incorporating fit results
[Fri May  4 18:53:55 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.578858 pixels away
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:51 2012] XMMSAS src. selection expression = ellipse(27214.485138, 31534.292145, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:51 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42_src.reg
[Fri May  4 21:17:51 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (276, 326) - (351, 401)
[Fri May  4 21:17:51 2012] XMMSAS bgd. selection expression = annulus(27214.485138, 31534.292145, 1087.500000, 2175.000000, X, Y) && !ellipse(24672.799042, 31495.953522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.967346, 31483.743042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.265045, 32220.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26203.728760, 31482.816437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.607086, 32928.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.918000, 32151.700000, 1425.632041, 1425.632041, 0.000000, X, Y) && !ellipse(26646.919525, 31392.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.766580, 32238.374000, 1424.968041, 1424.968041, 0.000000, X, Y) && !ellipse(27671.290894, 31526.130585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.524109, 32461.715118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.702698, 34148.909241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.263123, 31252.787354, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:51 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42.gif
[Fri May  4 21:50:32 2012] Mean detx,y = (2169.83, -7344.20) 
[Fri May  4 21:50:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:50:51 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:50:51 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Fri May  4 21:50:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Fri May  4 23:48:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 23:48:01 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:09 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:09 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat May  5 00:45:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:15 2012] Using photon index=1.80, rate=0.03, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src42.arf
[Sat May  5 00:45:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:15 2012] Updating source flux to 5e-13
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting