[Thu May  3 05:48:04 2012] Detection parameters:
  Position = (293.9, 370.9) = 5 34 29.08 22 7 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.0 +/- 26.2
  Background counts = 210.9
  Rate = 0.06 +/- 0.006

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 5.26'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Thu May  3 12:28:10 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.06"
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18.csv
[Thu May  3 23:11:37 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May  3 23:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18.csv
[Thu May  3 23:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May  3 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May  3 23:11:40 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May  3 23:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May  3 23:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:37 2012] Warning, spatial fit 18 centroid is now closest to src. 28
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 2790.630000, observed total counts = 2500.000000
[Thu May  3 23:12:37 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 34
[Fri May  4 06:29:44 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Fri May  4 06:29:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.937
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.06"
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16.csv
[Fri May  4 18:52:55 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May  4 18:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16.csv
[Fri May  4 18:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May  4 18:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May  4 18:52:58 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May  4 18:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May  4 18:52:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:54 2012] Spatial fit model total counts = 3427.410000, observed total counts = 3057.000000
[Fri May  4 18:53:54 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:55 2012] Spatial fit model total counts = 2780.140000, observed total counts = 2500.000000
[Fri May  4 18:53:55 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:48 2012] XMMSAS src. selection expression = ellipse(25522.265045, 32220.901306, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33_src.reg
[Fri May  4 21:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (256, 333) - (331, 408)
[Fri May  4 21:17:48 2012] XMMSAS bgd. selection expression = annulus(25522.265045, 32220.901306, 1087.500000, 2175.000000, X, Y) && !ellipse(24672.799042, 31495.953522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.967346, 31483.743042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.309723, 31560.340637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26203.728760, 31482.816437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.607086, 32928.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.918000, 32151.700000, 1425.632041, 1425.632041, 0.000000, X, Y) && !ellipse(26646.919525, 31392.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.766580, 32238.374000, 1424.968041, 1424.968041, 0.000000, X, Y) && !ellipse(27671.290894, 31526.130585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27214.485138, 31534.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.524109, 32461.715118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23083.341400, 32654.533400, 1510.112043, 1510.112043, 0.000000, X, Y) && !ellipse(25718.702698, 34148.909241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25620.317932, 34887.503876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.263123, 31252.787354, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:48 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33.gif
[Fri May  4 21:27:47 2012] Mean detx,y = (500.71, -7852.11) 
[Fri May  4 21:27:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:28:11 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:28:11 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri May  4 21:28:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri May  4 22:52:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 22:52:09 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:06 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:06 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May  5 00:45:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:12 2012] Using photon index=1.80, rate=0.0554, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src33.arf
[Sat May  5 00:45:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:12 2012] Updating source flux to 9.5e-13
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting