[Thu May  3 05:48:04 2012] Detection parameters:
  Position = (296.2, 393.1) = 5 34 28.38 22 9 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.4 +/- 19.9
  Background counts = 146.6
  Rate = 0.02 +/- 0.005

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 6.86'
[Thu May  3 12:28:10 2012] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 9.86"
[Thu May  3 12:28:10 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.176
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.86"
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu May  3 23:11:42 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu May  3 23:11:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72.csv
[Thu May  3 23:11:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:38 2012] Warning, spatial fit 72 centroid is now closest to src. 26
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 06:29:44 2012] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 9.86"
[Fri May  4 06:29:44 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.176
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.86"
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67.csv
[Fri May  4 18:52:57 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri May  4 18:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67.csv
[Fri May  4 18:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri May  4 18:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri May  4 18:53:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:55 2012] Spatial fit model total counts = 2288.820000, observed total counts = 1775.000000
[Fri May  4 18:53:55 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:55 2012] Source 27 is offset by -6.802912 and 1.534842 pixels which is larger than
2 X fitted extent = 2.749660 x 2.749660, not incorporating fit results
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:52 2012] XMMSAS src. selection expression = ellipse(25718.702698, 34148.909241, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27_src.reg
[Fri May  4 21:17:52 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (259, 356) - (334, 431)
[Fri May  4 21:17:52 2012] XMMSAS bgd. selection expression = annulus(25718.702698, 34148.909241, 1087.500000, 2175.000000, X, Y) && !ellipse(24672.799042, 31495.953522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.967346, 31483.743042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.309723, 31560.340637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.265045, 32220.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26203.728760, 31482.816437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.607086, 32928.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.918000, 32151.700000, 1425.632041, 1425.632041, 0.000000, X, Y) && !ellipse(26646.919525, 31392.757843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.766580, 32238.374000, 1424.968041, 1424.968041, 0.000000, X, Y) && !ellipse(27671.290894, 31526.130585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27214.485138, 31534.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.524109, 32461.715118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23083.341400, 32654.533400, 1510.112043, 1510.112043, 0.000000, X, Y) && !ellipse(25620.317932, 34887.503876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.263123, 31252.787354, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:52 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27.gif
[Fri May  4 21:58:37 2012] Mean detx,y = (561.74, -9810.45) 
[Fri May  4 21:58:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:59:02 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:59:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May  4 21:59:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat May  5 00:19:44 2012] Not generating rmf since there are only 90 counts
[Sat May  5 00:19:44 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:10 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:10 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat May  5 00:45:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:17 2012] Using photon index=1.80, rate=0.024, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src27.arf
[Sat May  5 00:45:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:17 2012] Updating source flux to 4.7e-13
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting