[Thu May  3 05:48:03 2012] Detection parameters:
  Position = (271.1, 106.1) = 5 34 36.21 21 48 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.5 +/- 20.8
  Background counts = 52.6
  Rate = 0.03 +/- 0.003

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 14.09'
[Thu May  3 12:28:10 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Thu May  3 12:28:10 2012] source mask rpix=3.1, npix_max = 51, mask sum = 55, frac = 1.063
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 13.47"
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63.csv
[Thu May  3 23:11:39 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu May  3 23:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63.csv
[Thu May  3 23:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu May  3 23:11:41 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Thu May  3 23:12:37 2012] Spatial fit model total counts = 1982.490000, observed total counts = 1766.000000
[Thu May  3 23:12:37 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:38 2012] Warning, spatial fit 63 centroid is now closest to src. 54
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 06:29:44 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Fri May  4 06:29:44 2012] source mask rpix=3.1, npix_max = 51, mask sum = 55, frac = 1.063
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 13.47"
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59.csv
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri May  4 18:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59.csv
[Fri May  4 18:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri May  4 18:53:00 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Fri May  4 18:53:55 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.787541 pixels away
[Fri May  4 18:53:55 2012] Warning, spatial fit 59 centroid is now closest to src. 54
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:53:55 2012] Source is confused with source 54
[Fri May  4 21:17:51 2012] XMMSAS src. selection expression = ellipse(23537.513824, 9180.444893, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:51 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21_src.reg
[Fri May  4 21:17:51 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (234, 69) - (309, 144)
[Fri May  4 21:17:51 2012] XMMSAS bgd. selection expression = annulus(23537.513824, 9180.444893, 1087.500000, 2175.000000, X, Y) && !ellipse(24171.059570, 9956.852455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.580292, 9082.855309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.980000, 12136.782000, 1940.464056, 242.557607, 94.330000, X, Y) && !ellipse(24171.333038, 7913.861839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.894043, 8307.767296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.036774, 11346.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23675.073547, 10814.918098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.778600, 11483.080400, 1991.944057, 811.776023, 96.955460, X, Y) && !ellipse(23259.676000, 11821.810000, 2021.336058, 2021.336058, 0.000000, X, Y) && !ellipse(22587.976000, 8177.252000, 1980.784057, 1362.560039, 324.027000, X, Y) && !ellipse(23831.672485, 7849.777397, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:51 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21.gif
[Fri May  4 21:52:18 2012] Mean detx,y = (-208.34, 15184.50) 
[Fri May  4 21:52:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:52:41 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:52:41 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May  4 21:52:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May  4 23:55:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 23:55:42 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:09 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:09 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat May  5 00:45:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:16 2012] Using photon index=1.80, rate=0.0286, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src21.arf
[Sat May  5 00:45:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:16 2012] Updating source flux to 1.1e-12
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting