[Thu May  3 05:48:03 2012] Detection parameters:
  Position = (272.7, 124.9) = 5 34 35.71 21 49 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.1 +/- 22.1
  Background counts = 58.5
  Rate = 0.03 +/- 0.004

[Thu May  3 05:48:11 2012] Off-axis axis estimate = 12.72'
[Thu May  3 12:28:10 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Thu May  3 12:28:10 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Thu May  3 12:28:10 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Thu May  3 12:28:10 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 12.79"
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53.csv
[Thu May  3 23:11:38 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu May  3 23:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53.csv
[Thu May  3 23:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu May  3 23:11:41 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu May  3 23:11:41 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Thu May  3 23:12:38 2012] Warning, spatial fit 53 centroid is now closest to src. 2
[Thu May  3 23:12:38 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:38 2012] Assessing source extent using major
[Thu May  3 23:12:38 2012] Source does appear to be extended
[Thu May  3 23:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:38 2012] Source is confused with source 18
[Thu May  3 23:12:38 2012] Source is confused with source 90
[Thu May  3 23:12:38 2012] Source is confused with source 91
[Fri May  4 06:29:44 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:29:44 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Fri May  4 06:29:44 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Fri May  4 06:29:44 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 12.79"
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src50.ximg exists
[Fri May  4 18:52:56 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri May  4 18:52:56 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_src50 appears to have run properly
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri May  4 18:53:00 2012] fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri May  4 18:53:00 2012] Fit fullrun_mos2_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Fri May  4 18:53:55 2012] Warning, spatial fit 50 centroid is now closest to src. 90
[Fri May  4 18:53:55 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.930970 pixels away
[Fri May  4 18:53:55 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:55 2012] Assessing source extent using major
[Fri May  4 18:53:55 2012] Source does appear to be extended
[Fri May  4 18:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 21:17:50 2012] XMMSAS src. selection expression = ellipse(23675.073547, 10814.918098, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 21:17:50 2012] Writing source region out to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20_src.reg
[Fri May  4 21:17:50 2012] Extracting stamp from image fullrun_mos2_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (235, 87) - (310, 162)
[Fri May  4 21:17:50 2012] XMMSAS bgd. selection expression = annulus(23675.073547, 10814.918098, 1087.500000, 2175.000000, X, Y) && !ellipse(24535.620000, 13354.820000, 741.544021, 741.544021, 0.000000, X, Y) && !ellipse(24171.059570, 9956.852455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.580292, 9082.855309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.980000, 12136.782000, 1940.464056, 242.557607, 94.330000, X, Y) && !ellipse(24658.430800, 13633.228200, 1177.664034, 1177.664034, 0.000000, X, Y) && !ellipse(24171.333038, 7913.861839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.894043, 8307.767296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.036774, 11346.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.962494, 13079.837967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.309479, 12395.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.513824, 9180.444893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.778600, 11483.080400, 1991.944057, 811.776023, 96.955460, X, Y) && !ellipse(23259.676000, 11821.810000, 2021.336058, 2021.336058, 0.000000, X, Y) && !ellipse(22587.976000, 8177.252000, 1980.784057, 1362.560039, 324.027000, X, Y) && !ellipse(23831.672485, 7849.777397, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 21:17:50 2012] Writing fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20.gif
[Fri May  4 21:47:07 2012] Mean detx,y = (-154.74, 13574.01) 
[Fri May  4 21:47:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 21:47:38 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 21:47:39 2012] Setting source spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May  4 21:47:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May  4 23:39:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 23:39:55 2012] rmf not generated due to insufficient counts
[Sat May  5 00:45:08 2012] Updating aperture counts using extracted products
[Sat May  5 00:45:08 2012] Error reading totcts from fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat May  5 00:45:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:15 2012] Using photon index=1.80, rate=0.0344, arf fullrun_mos2_xmm0412591901_pi300-10000_pass1_cl_src20.arf
[Sat May  5 00:45:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:15 2012] Updating source flux to 1.2e-12
[Sat May  5 00:51:41 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting