[Thu May  3 05:47:54 2012] Detection parameters:
  Position = (280.7, 89.4) = 5 34 33.22 21 47 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 15.3
  Background counts = 38.6
  Rate = 0.01 +/- 0.003

[Thu May  3 05:48:00 2012] Off-axis axis estimate = 15.21'
[Thu May  3 05:51:31 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:51:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 05:51:31 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Thu May  3 05:51:31 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.882
[Thu May  3 05:51:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 14.03"
[Thu May  3 12:28:05 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5.ximg exists
[Thu May  3 12:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5.csv
[Thu May  3 12:28:05 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May  3 12:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5.csv
[Thu May  3 12:28:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 12:28:07 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May  3 12:28:07 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  3 12:28:07 2012] Fit fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May  3 23:12:07 2012] Warning, spatial fit 5 centroid is now closest to src. 61
[Thu May  3 23:12:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:07 2012] Assessing source extent using major
[Thu May  3 23:12:07 2012] Source does appear to be extended
[Thu May  3 23:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:07 2012] Source is confused with source 63
[Thu May  3 23:13:01 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu May  3 23:13:01 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Thu May  3 23:13:01 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.882
[Thu May  3 23:13:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.03"
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5.csv
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5.csv
[Fri May  4 06:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May  4 06:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:24 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 18.339568 pixels away
[Fri May  4 18:53:24 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:24 2012] Assessing source extent using major
[Fri May  4 18:53:24 2012] Source does appear to be extended
[Fri May  4 18:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:54:18 2012] XMMSAS src. selection expression = ellipse(24369.791168, 7731.880821, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 18:54:18 2012] Writing source region out to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6_src.reg
[Fri May  4 18:54:18 2012] Extracting stamp from image fullrun_mos1_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (243, 52) - (318, 127)
[Fri May  4 18:54:18 2012] XMMSAS bgd. selection expression = annulus(24369.791168, 7731.880821, 1087.500000, 2175.000000, X, Y) && !ellipse(24350.348000, 9391.760000, 2180.128063, 2180.128063, 0.000000, X, Y) && !ellipse(24675.477200, 12380.656000, 3764.688108, 3764.688108, 0.000000, X, Y) && !ellipse(23708.074000, 11234.522000, 1597.592046, 1597.592046, 0.000000, X, Y) && !ellipse(24219.867000, 10917.836000, 2742.416079, 2742.416079, 0.000000, X, Y) && !ellipse(24429.107178, 10308.133408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.290000, 9538.682000, 2180.128063, 2180.128063, 0.000000, X, Y) && !ellipse(24235.494000, 9480.240000, 1660.656048, 1660.656048, 0.000000, X, Y) && !ellipse(23985.130524, 8750.310898, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 18:54:18 2012] Writing fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6.gif
[Fri May  4 18:58:11 2012] Mean detx,y = (16676.27, -654.30) 
[Fri May  4 18:58:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 18:58:43 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 18:58:43 2012] Setting source spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri May  4 18:58:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri May  4 19:55:15 2012] Not generating rmf since there are only 87 counts
[Fri May  4 19:55:15 2012] rmf not generated due to insufficient counts
[Sat May  5 00:44:55 2012] Updating aperture counts using extracted products
[Sat May  5 00:44:55 2012] Error reading totcts from fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May  5 00:45:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:01 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src6.arf
[Sat May  5 00:45:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:01 2012] Updating source flux to 5.2e-13
[Sat May  5 00:45:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting