[Thu May 3 05:47:58 2012] Detection parameters: Position = (289.6, 180.0) = 5 34 30.42 21 53 41.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 112.4 +/- 22.4 Background counts = 173.8 Rate = 0.03 +/- 0.006 [Thu May 3 05:48:00 2012] Off-axis axis estimate = 8.61' [Thu May 3 05:51:31 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting [Thu May 3 05:51:31 2012] Initial guess for spatial extent in simple fitting = 10.73" [Thu May 3 05:51:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022 [Thu May 3 05:51:31 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.73" [Thu May 3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33.ximg exists [Thu May 3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33.csv [Thu May 3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33_1.ximg exists [Thu May 3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33.csv [Thu May 3 12:28:06 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Thu May 3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Thu May 3 12:28:08 2012] Fit fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Thu May 3 23:12:07 2012] Warning, spatial fit 33 centroid is now closest to src. 38 [Thu May 3 23:12:07 2012] Source 40 is offset by -2.322349 and 1.431403 pixels which is larger than 2 X fitted extent = 1.246837 x 1.246837, not incorporating fit results [Thu May 3 23:12:07 2012] Source 40 is offset by 4.343237 and -0.297236 pixels which is larger than 2 X fitted extent = 1.797526 x 1.797526, not incorporating fit results [Thu May 3 23:12:07 2012] Vigneting correction estimate = 1.000000 [Thu May 3 23:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 23:12:07 2012] Assessing source extent using major [Thu May 3 23:12:07 2012] Source does appear to be extended [Thu May 3 23:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 3 23:12:07 2012] Source is confused with source 42 [Thu May 3 23:13:01 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting [Thu May 3 23:13:01 2012] Initial guess for spatial extent in simple fitting = 10.73" [Thu May 3 23:13:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022 [Thu May 3 23:13:01 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.73" [Fri May 4 06:29:41 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31.ximg exists [Fri May 4 06:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31.csv [Fri May 4 06:29:41 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31_1.ximg exists [Fri May 4 06:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31.csv [Fri May 4 06:29:41 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 4 06:29:43 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Fri May 4 06:29:43 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Fri May 4 06:29:43 2012] Fit fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly [Fri May 4 18:53:24 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 15.557944 pixels away [Fri May 4 18:53:24 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 10.306250 pixels away [Fri May 4 18:53:24 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 17.916738 pixels away [Fri May 4 18:53:24 2012] Source 40 is offset by -0.978556 and 3.549040 pixels which is larger than 2 X fitted extent = 1.390887 x 1.390887, not incorporating fit results [Fri May 4 18:53:24 2012] Vigneting correction estimate = 1.000000 [Fri May 4 18:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 4 18:53:24 2012] Assessing source extent using major [Fri May 4 18:53:24 2012] Source does appear to be extended [Fri May 4 18:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 4 18:54:19 2012] XMMSAS src. selection expression = ellipse(25149.947632, 15611.234497, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 4 18:54:19 2012] Writing source region out to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40_src.reg [Fri May 4 18:54:19 2012] Extracting stamp from image fullrun_mos1_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (252, 142) - (327, 217) [Fri May 4 18:54:19 2012] XMMSAS bgd. selection expression = annulus(25149.947632, 15611.234497, 1087.500000, 2175.000000, X, Y) && !ellipse(22905.115051, 17704.889709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24373.255981, 17564.733368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.997406, 17614.635971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23592.151672, 17007.910004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24310.899963, 16139.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24724.652000, 14522.698000, 1834.016053, 1834.016053, 0.000000, X, Y) && !ellipse(23871.370483, 14657.198837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.614000, 14158.314000, 1882.344054, 1882.344054, 0.000000, X, Y) && !ellipse(24388.663116, 14386.627457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25041.048950, 13865.473083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.947754, 13784.821259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24674.864655, 13169.109344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.865356, 12998.746735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.477200, 12380.656000, 3764.688108, 3764.688108, 0.000000, X, Y) && !ellipse(24219.867000, 10917.836000, 2742.416079, 2742.416079, 0.000000, X, Y) [Fri May 4 18:54:19 2012] Writing fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40.gif [Fri May 4 19:15:29 2012] Mean detx,y = (8914.27, -1033.06) [Fri May 4 19:15:33 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 4 19:15:49 2012] Binned source spectrum to 10 counts/bin [Fri May 4 19:15:50 2012] Setting source spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Fri May 4 19:15:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40_bgd.pi.gz [Fri May 4 20:25:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 4 20:25:26 2012] rmf not generated due to insufficient counts [Sat May 5 00:44:58 2012] Updating aperture counts using extracted products [Sat May 5 00:44:58 2012] Error reading totcts from fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Sat May 5 00:45:03 2012] Calculating source flux in energy range 0.30-8.00 [Sat May 5 00:45:03 2012] Using photon index=1.80, rate=0.031, arf fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src40.arf [Sat May 5 00:45:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 5 00:45:03 2012] Updating source flux to 5.6e-13 [Sat May 5 00:45:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting