[Thu May  3 05:47:57 2012] Detection parameters:
  Position = (274.2, 203.0) = 5 34 35.25 21 55 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.2 +/- 22.6
  Background counts = 239.6
  Rate = 0.06 +/- 0.007

[Thu May  3 05:48:00 2012] Off-axis axis estimate = 7.14'
[Thu May  3 05:51:31 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:51:31 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu May  3 05:51:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Thu May  3 05:51:31 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.00"
[Thu May  3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27.ximg exists
[Thu May  3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27.csv
[Thu May  3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May  3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27.csv
[Thu May  3 12:28:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May  3 12:28:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:07 2012] Warning, spatial fit 27 centroid is now closest to src. 36
[Thu May  3 23:12:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:07 2012] Assessing source extent using major
[Thu May  3 23:12:07 2012] Source does appear to be extended
[Thu May  3 23:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:07 2012] Source is confused with source 3
[Thu May  3 23:13:01 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Thu May  3 23:13:01 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Thu May  3 23:13:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Thu May  3 23:13:01 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.00"
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src26.ximg exists
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May  4 06:29:40 2012] Fit fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May  4 06:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:24 2012] Warning, spatial fit 26 centroid is now closest to src. 1
[Fri May  4 18:53:24 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:24 2012] Assessing source extent using major
[Fri May  4 18:53:24 2012] Source does appear to be extended
[Fri May  4 18:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:54:19 2012] XMMSAS src. selection expression = ellipse(23804.997406, 17614.635971, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 18:54:19 2012] Writing source region out to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34_src.reg
[Fri May  4 18:54:19 2012] Extracting stamp from image fullrun_mos1_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (237, 166) - (312, 241)
[Fri May  4 18:54:19 2012] XMMSAS bgd. selection expression = annulus(23804.997406, 17614.635971, 1087.500000, 2175.000000, X, Y) && !ellipse(22905.115051, 17704.889709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22033.293701, 17711.937485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24373.255981, 17564.733368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.001328, 17806.432632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23592.151672, 17007.910004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24310.899963, 16139.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25149.947632, 15611.234497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24724.652000, 14522.698000, 1834.016053, 1834.016053, 0.000000, X, Y) && !ellipse(23871.370483, 14657.198837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.614000, 14158.314000, 1882.344054, 1882.344054, 0.000000, X, Y) && !ellipse(24675.477200, 12380.656000, 3764.688108, 3764.688108, 0.000000, X, Y)
[Fri May  4 18:54:19 2012] Writing fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34.gif
[Fri May  4 19:14:07 2012] Mean detx,y = (7094.92, 292.22) 
[Fri May  4 19:14:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 19:14:32 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 19:14:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri May  4 19:14:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri May  4 20:24:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 20:24:45 2012] rmf not generated due to insufficient counts
[Sat May  5 00:44:58 2012] Updating aperture counts using extracted products
[Sat May  5 00:44:58 2012] Error reading totcts from fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat May  5 00:45:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:03 2012] Using photon index=1.80, rate=0.0578, arf fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src34.arf
[Sat May  5 00:45:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:03 2012] Updating source flux to 9.6e-13
[Sat May  5 00:45:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting