[Thu May  3 05:47:56 2012] Detection parameters:
  Position = (363.6, 271.0) = 5 34 7.30 22 0 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 17.5
  Background counts = 147.1
  Rate = 0.03 +/- 0.005

[Thu May  3 05:48:00 2012] Off-axis axis estimate = 5.12'
[Thu May  3 05:51:31 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:51:31 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu May  3 05:51:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.607
[Thu May  3 05:51:31 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.99"
[Thu May  3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18.ximg exists
[Thu May  3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18.csv
[Thu May  3 12:28:06 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May  3 12:28:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18.csv
[Thu May  3 12:28:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May  3 12:28:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:07 2012] Warning, spatial fit 18 centroid is now closest to src. 24
[Thu May  3 23:12:07 2012] Spatial fit model total counts = 2058.160000, observed total counts = 1398.000000
[Thu May  3 23:12:07 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:12:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:07 2012] Assessing source extent using major
[Thu May  3 23:12:07 2012] Source does appear to be extended
[Thu May  3 23:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:07 2012] Source is confused with source 22
[Thu May  3 23:12:07 2012] Source is confused with source 24
[Thu May  3 23:13:01 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu May  3 23:13:01 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu May  3 23:13:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.607
[Thu May  3 23:13:01 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.99"
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18.csv
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18.csv
[Fri May  4 06:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May  4 06:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:24 2012] Source 23 is offset by 3.470008 and -1.598401 pixels which is larger than
2 X fitted extent = 1.281458 x 1.281458, not incorporating fit results
[Fri May  4 18:53:24 2012] Spatial fit model total counts = 2043.370000, observed total counts = 1398.000000
[Fri May  4 18:53:24 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 18:53:24 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:24 2012] Assessing source extent using major
[Fri May  4 18:53:24 2012] Source does appear to be extended
[Fri May  4 18:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:54:19 2012] XMMSAS src. selection expression = ellipse(31581.620697, 23526.381287, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 18:54:19 2012] Writing source region out to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23_src.reg
[Fri May  4 18:54:19 2012] Extracting stamp from image fullrun_mos1_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (326, 233) - (401, 308)
[Fri May  4 18:54:19 2012] XMMSAS bgd. selection expression = annulus(31581.620697, 23526.381287, 1087.500000, 2175.000000, X, Y) && !ellipse(31545.615845, 26218.620819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31890.456360, 24500.429230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31528.222748, 24922.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32198.756000, 23446.746000, 1497.776043, 1497.776043, 0.000000, X, Y) && !ellipse(31655.111908, 23171.857880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.213257, 22243.118011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31536.530334, 22033.942856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32106.928864, 20565.544388, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 18:54:19 2012] Writing fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23.gif
[Fri May  4 19:09:12 2012] Mean detx,y = (730.44, -7346.55) 
[Fri May  4 19:09:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 19:09:40 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 19:09:40 2012] Setting source spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May  4 19:09:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri May  4 20:21:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 20:21:30 2012] rmf not generated due to insufficient counts
[Sat May  5 00:44:57 2012] Updating aperture counts using extracted products
[Sat May  5 00:44:57 2012] Error reading totcts from fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat May  5 00:45:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:02 2012] Using photon index=1.80, rate=0.0349, arf fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src23.arf
[Sat May  5 00:45:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:02 2012] Updating source flux to 8e-13
[Sat May  5 00:45:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting