[Thu May  3 05:47:55 2012] Detection parameters:
  Position = (363.2, 301.9) = 5 34 7.42 22 2 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.5 +/- 17.8
  Background counts = 157.5
  Rate = 0.04 +/- 0.006

[Thu May  3 05:48:00 2012] Off-axis axis estimate = 4.70'
[Thu May  3 05:51:31 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Thu May  3 05:51:31 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Thu May  3 05:51:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.592
[Thu May  3 05:51:31 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.78"
[Thu May  3 12:28:05 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12.ximg exists
[Thu May  3 12:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12.csv
[Thu May  3 12:28:05 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May  3 12:28:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12.csv
[Thu May  3 12:28:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May  3 12:28:08 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May  3 12:28:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May  3 12:28:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:12:07 2012] Warning, spatial fit 12 centroid is now closest to src. 20
[Thu May  3 23:12:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:12:07 2012] Assessing source extent using major
[Thu May  3 23:12:07 2012] Source does appear to be extended
[Thu May  3 23:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:12:07 2012] Source is confused with source 13
[Thu May  3 23:13:01 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Thu May  3 23:13:01 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Thu May  3 23:13:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.592
[Thu May  3 23:13:01 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.78"
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12.csv
[Fri May  4 06:29:40 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May  4 06:29:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12.csv
[Fri May  4 06:29:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May  4 06:29:42 2012] fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May  4 06:29:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May  4 06:29:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591901_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 18:53:24 2012] Source 16 is offset by -6.072760 and 6.454055 pixels which is larger than
2 X fitted extent = 3.263522 x 8.071586, not incorporating fit results
[Fri May  4 18:53:24 2012] Vigneting correction estimate = 1.000000
[Fri May  4 18:53:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 18:53:24 2012] Assessing source extent using major
[Fri May  4 18:53:24 2012] Source does appear to be extended
[Fri May  4 18:53:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 18:54:18 2012] XMMSAS src. selection expression = ellipse(31545.615845, 26218.620819, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 18:54:18 2012] Writing source region out to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16_src.reg
[Fri May  4 18:54:18 2012] Extracting stamp from image fullrun_mos1_xmm0412591901_pi300-10000_cl_sm2.00.img.gz, (326, 264) - (401, 339)
[Fri May  4 18:54:18 2012] XMMSAS bgd. selection expression = annulus(31545.615845, 26218.620819, 1087.500000, 2175.000000, X, Y) && !ellipse(31668.373779, 28555.728943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31758.881073, 28138.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31940.859436, 27364.921753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32303.387756, 26581.781036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.211578, 26747.093781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31890.456360, 24500.429230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31528.222748, 24922.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32198.756000, 23446.746000, 1497.776043, 1497.776043, 0.000000, X, Y) && !ellipse(31581.620697, 23526.381287, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  4 18:54:18 2012] Writing fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16.gif
[Fri May  4 19:04:34 2012] Mean detx,y = (-1984.05, -7181.61) 
[Fri May  4 19:04:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 19:04:54 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 19:04:54 2012] Setting source spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May  4 19:04:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri May  4 20:11:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 20:11:28 2012] rmf not generated due to insufficient counts
[Sat May  5 00:44:56 2012] Updating aperture counts using extracted products
[Sat May  5 00:44:56 2012] Error reading totcts from fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May  5 00:45:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat May  5 00:45:02 2012] Using photon index=1.80, rate=0.0417, arf fullrun_mos1_xmm0412591901_pi300-10000_pass1_cl_src16.arf
[Sat May  5 00:45:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  5 00:45:02 2012] Updating source flux to 9.1e-13
[Sat May  5 00:45:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting