[Wed Dec 21 22:44:32 2011] Detection parameters: Position = (392.3, 288.2) = 5 34 7.24 21 58 45.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 530.3 +/- 52.8 Background counts = 651.8 Rate = 0.04 +/- 0.004 [Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 6.84' [Thu Dec 22 17:52:01 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 9.85" [Thu Dec 22 17:52:01 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.982 [Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 9.85" [Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57.ximg exists [Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57.csv [Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57_1.ximg exists [Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57.csv [Fri Dec 23 21:48:55 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src57.ximg exists [Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists [Fri Dec 23 21:48:58 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly [Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 8592.400000, observed total counts = 8583.000000 [Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 97 = 6.060757 pixels [Fri Dec 23 21:50:15 2011] Warning, changing simple spatial fit ID from 57 to 50 [Fri Dec 23 21:50:15 2011] 8435.921000 total counts/ 7722.370000 bgd. counts: snr = 8.119882 Spatial fit parameters: Offset between fit and detection position for source 97 = 6.060757 pixels Position = (396.5, 292.5) = 5 34 5.93 21 59 6.0 Extent = 20.4 (20.4-40.8)", rotation angle = 0 Source counts = 713.6 +/- 91.8 Background counts = 7722.4 Rate = 0.04 +/- 0.005 [Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 8876.830000, observed total counts = 8877.000000 [Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 97 = 1.870189 pixels [Fri Dec 23 21:50:15 2011] Warning, changing simple spatial fit ID from 50 to 80 [Fri Dec 23 21:50:15 2011] 8438.578000 total counts/ 7776.650000 bgd. counts: snr = 7.506102 Spatial fit parameters: Offset between fit and detection position for source 97 = 1.870189 pixels Position = (398.3, 292.3) = 5 34 5.34 21 59 5.2 Extent = 20.3 (20.3-40.6)", rotation angle = 0 Source counts = 661.9 +/- 91.9 Background counts = 7776.6 Rate = 0.03 +/- 0.005 [Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000 [Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 23 21:50:15 2011] Assessing source extent using major axis lower bound [Fri Dec 23 21:50:15 2011] Source does appear to be extended [Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 23 21:50:16 2011] Source is confused with source 96 [Sun Dec 25 02:57:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Dec 25 02:57:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 20.29" [Sun Dec 25 02:57:50 2011] source mask rpix=4.7, npix_max = 106, mask sum = 100, frac = 0.937 [Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 20.29" [Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src53.ximg exists [Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src53_1.ximg exists [Mon Dec 26 10:48:10 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src53 appears to have run properly [Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Mon Dec 26 10:48:14 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly [Mon Dec 26 10:50:13 2011] Source 97 is offset by -1.682655 and -0.675103 pixels which is larger than 2 X fitted extent = 1.124359 x 1.124359, not incorporating fit results [Mon Dec 26 10:50:13 2011] Spatial fit model total counts = 8586.780000, observed total counts = 8583.000000 [Mon Dec 26 10:50:13 2011] Offset between fit and detection position for source 97 = 1.982686 pixels [Mon Dec 26 10:50:13 2011] Warning, changing simple spatial fit ID from 53 to 47 [Mon Dec 26 10:50:13 2011] 8431.132000 total counts/ 7716.010000 bgd. counts: snr = 8.141112 Spatial fit parameters: Offset between fit and detection position for source 97 = 1.982686 pixels Position = (396.4, 292.6) = 5 34 5.96 21 59 6.4 Extent = 20.4 (20.4-40.8)", rotation angle = 0 Source counts = 715.1 +/- 91.8 Background counts = 7716.0 Rate = 0.04 +/- 0.005 [Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000 [Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound [Mon Dec 26 10:50:14 2011] Source does appear to be extended [Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Dec 27 03:26:04 2011] XMMSAS src. selection expression = ellipse(34433.978000, 25409.126000, 1224.954035, 1224.954035, 0.000000, X, Y) [Tue Dec 27 03:26:04 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97_src.reg [Tue Dec 27 03:26:04 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (326, 222) - (467, 363) [Tue Dec 27 03:26:04 2011] XMMSAS bgd. selection expression = annulus(34433.978000, 25409.126000, 2041.590059, 4083.180117, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33960.431366, 26138.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29122.598000, 20147.960600, 1493.928043, 1493.928043, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.644000, 20151.524400, 2507.120072, 2507.120072, 0.000000, X, Y) && !ellipse(34180.339478, 27229.443573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34257.188000, 25147.036000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(35035.692000, 30824.822000, 1729.760050, 346.068010, 358.363000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(33490.002655, 21953.500778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33983.702698, 23710.130554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29540.821623, 20230.410588, 1493.928043, 717.637621, 0.000000, X, Y) && !ellipse(33944.673800, 24160.286000, 1566.160045, 1566.160045, 0.000000, X, Y) && !ellipse(35420.525200, 27214.815400, 1494.912043, 804.768023, 0.000000, X, Y) && !ellipse(33659.255463, 23100.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34300.301666, 23355.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35010.790161, 25885.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.236298, 26313.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35186.059265, 25355.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.393066, 22316.513641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35909.363586, 28061.792603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.284088, 28818.847656, 870.000000, 870.000000, 0.000000, X, Y) [Tue Dec 27 03:26:04 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97.gif [Tue Dec 27 06:52:59 2011] Mean detx,y = (-7435.55, -1622.58) [Tue Dec 27 06:53:04 2011] Setting backscal keywords in source and bgd. spectrum [Tue Dec 27 06:54:05 2011] Binned source spectrum to 10 counts/bin [Tue Dec 27 06:54:05 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97_src_b10.pi.gz [Tue Dec 27 06:54:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97_bgd.pi.gz [Tue Dec 27 20:55:17 2011] Updating aperture counts using extracted products [Tue Dec 27 20:55:17 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97_src_b10.pi.gz [Tue Dec 27 20:55:30 2011] Calculating source flux in energy range 0.30-8.00 [Tue Dec 27 20:55:30 2011] Using photon index=1.80, rate=0.0351, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src97.arf [Tue Dec 27 20:55:30 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Dec 27 20:55:30 2011] Updating source flux to 5.3e-13 [Tue Dec 27 21:06:12 2011] Flag b found in src. 97 procflags, skipping spectral fitting [Tue Dec 27 21:06:12 2011] Flag c found in src. 97 procflags, skipping spectral fitting