[Wed Dec 21 22:44:32 2011] Detection parameters:
  Position = (231.8, 300.1) = 5 34 57.42 21 59 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 696.3 +/- 35.8
  Background counts = 644.8
  Rate = 0.06 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 4.83'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 8.85"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.623
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 8.85"
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src24.ximg exists
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri Dec 23 21:48:54 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src24 appears to have run properly
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 24 centroid is now closest to src. 91
[Fri Dec 23 21:50:15 2011] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 11.048172 pixels away
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 91
[Fri Dec 23 21:50:16 2011] Source is confused with source 90
[Fri Dec 23 21:50:16 2011] Source is confused with source 14
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 8.85"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.0, npix_max = 25, mask sum = 16, frac = 0.623
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 8.85"
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23.csv
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23.csv
[Mon Dec 26 10:48:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Dec 26 10:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Dec 26 10:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Dec 26 10:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:50:13 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 10.396473 pixels away
[Mon Dec 26 10:50:13 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 12.089376 pixels away
[Mon Dec 26 10:50:14 2011] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 18.931436 pixels away
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:00 2011] XMMSAS src. selection expression = ellipse(20116.999756, 26059.396057, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:00 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94_src.reg
[Tue Dec 27 03:26:00 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (194, 263) - (269, 338)
[Tue Dec 27 03:26:00 2011] XMMSAS bgd. selection expression = annulus(20116.999756, 26059.396057, 1087.500000, 2175.000000, X, Y) && !ellipse(20265.896454, 28756.178345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20013.714000, 26479.592000, 1414.208041, 1414.208041, 0.000000, X, Y) && !ellipse(20005.860400, 26737.497000, 1032.496030, 1032.496030, 0.000000, X, Y) && !ellipse(20002.331200, 27509.498000, 1446.632042, 1446.632042, 0.000000, X, Y) && !ellipse(20401.658722, 28137.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20352.997345, 25621.610931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19062.687622, 28797.920715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20212.491867, 25089.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20136.727951, 24237.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.880600, 28222.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.892303, 27714.310333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19863.481628, 23547.433014, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:00 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94.gif
[Tue Dec 27 04:57:18 2011] Mean detx,y = (7158.23, -1823.74) 
[Tue Dec 27 04:57:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 04:57:44 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 04:57:45 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Tue Dec 27 04:57:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Tue Dec 27 13:52:44 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 13:52:44 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:14 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:14 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Tue Dec 27 20:55:28 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:28 2011] Using photon index=1.80, rate=0.0609, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src94.arf
[Tue Dec 27 20:55:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:28 2011] Updating source flux to 1.2e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting