[Wed Dec 21 22:44:31 2011] Detection parameters:
  Position = (234.5, 337.0) = 5 34 56.59 22 2 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 493.6 +/- 35.5
  Background counts = 532.6
  Rate = 0.05 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 5.41'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 9.14"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.776
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 44 for pass 0, mean size = 9.14"
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44.csv
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44.csv
[Fri Dec 23 21:48:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 44 centroid is now closest to src. 73
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 80
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.776
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 9.14"
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41.ximg exists
[Mon Dec 26 10:48:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41.csv
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41_1.ximg exists
[Mon Dec 26 10:48:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41.csv
[Mon Dec 26 10:48:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Mon Dec 26 10:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41.csv
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Mon Dec 26 10:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41.csv
[Mon Dec 26 10:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:50:13 2011] Spatial fit model total counts = 5470.670000, observed total counts = 6244.000000
[Mon Dec 26 10:50:13 2011] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Dec 26 10:50:13 2011] Spatial fit model total counts = 4598.590000, observed total counts = 5774.000000
[Mon Dec 26 10:50:13 2011] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Dec 26 10:50:14 2011] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 76 at 16.014450 pixels away
[Mon Dec 26 10:50:14 2011] Warning: source 97 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 76 at 10.102263 pixels away
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:03 2011] XMMSAS src. selection expression = ellipse(20350.344971, 29270.011475, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:03 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76_src.reg
[Tue Dec 27 03:26:03 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (197, 299) - (272, 374)
[Tue Dec 27 03:26:03 2011] XMMSAS bgd. selection expression = annulus(20350.344971, 29270.011475, 1087.500000, 2175.000000, X, Y) && !ellipse(20265.896454, 28756.178345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20013.714000, 26479.592000, 1414.208041, 1414.208041, 0.000000, X, Y) && !ellipse(20249.050800, 30622.687600, 1515.648044, 1515.648044, 0.000000, X, Y) && !ellipse(20005.860400, 26737.497000, 1032.496030, 1032.496030, 0.000000, X, Y) && !ellipse(20002.331200, 27509.498000, 1446.632042, 1446.632042, 0.000000, X, Y) && !ellipse(20295.504000, 31995.516000, 1219.352035, 1219.352035, 0.000000, X, Y) && !ellipse(20401.658722, 28137.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.996017, 30829.926147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19582.656525, 31873.044678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20487.639191, 29786.592560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19062.687622, 28797.920715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.880600, 28222.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.892303, 27714.310333, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:03 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76.gif
[Tue Dec 27 06:12:23 2011] Mean detx,y = (7125.65, 1410.08) 
[Tue Dec 27 06:12:26 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:12:51 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:12:51 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Dec 27 06:12:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Dec 27 15:38:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 15:38:50 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:16 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:16 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Dec 27 20:55:29 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:29 2011] Using photon index=1.80, rate=0.0481, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src76.arf
[Tue Dec 27 20:55:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:29 2011] Updating source flux to 1.1e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting