[Wed Dec 21 22:44:30 2011] Detection parameters:
  Position = (403.4, 354.0) = 5 34 3.73 22 3 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 443.4 +/- 41.9
  Background counts = 362.5
  Rate = 0.04 +/- 0.004

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 8.61'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.851
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 10.74"
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53.csv
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53.csv
[Fri Dec 23 21:48:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 53 centroid is now closest to src. 71
[Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 5817.390000, observed total counts = 5813.000000
[Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 66 = 0.848478 pixels
[Fri Dec 23 21:50:15 2011] Warning, changing simple spatial fit ID from 53 to 56
[Fri Dec 23 21:50:15 2011] 5564.964000 total counts/ 5398.880000 bgd. counts: snr = 2.260351
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 0.848478 pixels
  Position = (403.3, 354.9) = 5 34 3.78 22 3 37.2
  Extent = 21.6 (10.2-43.2)" x 4.3 (4.2-4.4)", rotation angle = 358 (355-0) degrees
  Source counts = 166.1 +/- 74.6
  Background counts = 5398.9
  Rate = 0.008 +/- 0.004
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.31
[Fri Dec 23 21:50:15 2011] Source is asymmetric
[Fri Dec 23 21:50:16 2011] Source is confused with source 63
[Sun Dec 25 02:57:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 12.97"
[Sun Dec 25 02:57:50 2011] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.845
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 12.97"
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src50.ximg exists
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Dec 26 10:48:10 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src50 appears to have run properly
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Dec 26 10:48:14 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Dec 26 10:50:14 2011] Warning, spatial fit 50 centroid is now closest to src. 71
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.31
[Mon Dec 26 10:50:14 2011] Source is asymmetric
[Tue Dec 27 03:26:04 2011] XMMSAS src. selection expression = ellipse(35035.692000, 30824.822000, 1297.320037, 259.551007, 358.363000, X, Y)
[Tue Dec 27 03:26:04 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66_src.reg
[Tue Dec 27 03:26:04 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (329, 280) - (478, 429)
[Tue Dec 27 03:26:04 2011] XMMSAS bgd. selection expression = annulus(35035.692000, 30824.822000, 2162.200062, 4324.400124, X, Y) && !ellipse(31179.860000, 34196.614000, 1724.416050, 449.452813, 3.901000, X, Y) && !ellipse(34364.306458, 31441.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(33960.431366, 26138.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34180.339478, 27229.443573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.758972, 32146.815369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34257.188000, 25147.036000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(34433.978000, 25409.126000, 1633.272047, 1633.272047, 0.000000, X, Y) && !ellipse(31584.214661, 34679.681458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31052.924713, 34685.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.848236, 31972.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35420.525200, 27214.815400, 1494.912043, 804.768023, 0.000000, X, Y) && !ellipse(35753.144318, 30755.351685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.746704, 30851.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33013.228424, 34082.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35010.790161, 25885.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34922.008200, 32413.492000, 1755.952051, 1755.952051, 0.000000, X, Y) && !ellipse(35127.425598, 31188.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.236298, 26313.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) && !ellipse(34006.055389, 34005.901398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.333282, 32123.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.739899, 32859.019012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35909.363586, 28061.792603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.284088, 28818.847656, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:04 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66.gif
[Tue Dec 27 06:49:02 2011] Mean detx,y = (-7662.07, 3796.49) 
[Tue Dec 27 06:49:06 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:50:21 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:50:22 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Dec 27 06:50:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Tue Dec 27 20:55:17 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:17 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue Dec 27 20:55:30 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:30 2011] Using photon index=1.80, rate=0.00816, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src66.arf
[Tue Dec 27 20:55:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:30 2011] Updating source flux to 1.6e-13
[Tue Dec 27 21:06:12 2011] Flag c found in src. 66 procflags, skipping spectral fitting