[Wed Dec 21 22:44:30 2011] Detection parameters:
  Position = (395.5, 362.0) = 5 34 6.19 22 4 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 771.1 +/- 38.0
  Background counts = 409.6
  Rate = 0.07 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 8.41'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 10.64"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.692
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 10.64"
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18.csv
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18.csv
[Fri Dec 23 21:48:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 18 centroid is now closest to src. 57
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 66
[Fri Dec 23 21:50:16 2011] Source is confused with source 67
[Fri Dec 23 21:50:16 2011] Source is confused with source 57
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.692
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 10.64"
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src17.ximg exists
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Dec 26 10:48:09 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src17 appears to have run properly
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Dec 26 10:48:12 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Dec 26 10:50:13 2011] Warning, spatial fit 17 centroid is now closest to src. 57
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:25:59 2011] XMMSAS src. selection expression = ellipse(34364.306458, 31441.820129, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:25:59 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63_src.reg
[Tue Dec 27 03:25:59 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (358, 324) - (433, 399)
[Tue Dec 27 03:25:59 2011] XMMSAS bgd. selection expression = annulus(34364.306458, 31441.820129, 1087.500000, 2175.000000, X, Y) && !ellipse(31179.860000, 34196.614000, 1724.416050, 449.452813, 3.901000, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.758972, 32146.815369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35035.692000, 30824.822000, 1729.760050, 346.068010, 358.363000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(34990.848236, 31972.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35753.144318, 30755.351685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.746704, 30851.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33013.228424, 34082.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34922.008200, 32413.492000, 1755.952051, 1755.952051, 0.000000, X, Y) && !ellipse(35127.425598, 31188.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) && !ellipse(34006.055389, 34005.901398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.333282, 32123.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.739899, 32859.019012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.284088, 28818.847656, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:25:59 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63.gif
[Tue Dec 27 04:14:36 2011] Mean detx,y = (-7051.86, 4330.69) 
[Tue Dec 27 04:14:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 04:15:11 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 04:15:12 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Dec 27 04:15:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Dec 27 13:22:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 13:22:57 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:13 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:13 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Dec 27 20:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:27 2011] Using photon index=1.80, rate=0.0655, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src63.arf
[Tue Dec 27 20:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:27 2011] Updating source flux to 1.2e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting