[Wed Dec 21 22:44:30 2011] Detection parameters:
  Position = (401.2, 376.0) = 5 34 4.43 22 5 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.6 +/- 32.5
  Background counts = 386.2
  Rate = 0.02 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 9.33'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 11.09"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 98 for pass 0, mean size = 11.09"
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src98.ximg exists
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src98_1.ximg exists
[Fri Dec 23 21:48:56 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src98 appears to have run properly
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Fri Dec 23 21:48:59 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Fri Dec 23 21:50:15 2011] Source 57 is offset by -3.624770 and 3.201311 pixels which is larger than
2 X fitted extent = 1.222423 x 1.222423, not incorporating fit results
[Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 5792.740000, observed total counts = 5786.000000
[Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 57 = 2.965774 pixels
[Fri Dec 23 21:50:15 2011] Warning, changing simple spatial fit ID from 98 to 83
[Fri Dec 23 21:50:15 2011] 5561.980000 total counts/ 4897.710000 bgd. counts: snr = 9.491790
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 2.965774 pixels
  Position = (402.0, 373.1) = 5 34 4.18 22 4 56.6
  Extent = 21.9 (21.9-43.9)", rotation angle = 0
  Source counts = 664.3 +/- 74.6
  Background counts = 4897.7
  Rate = 0.03 +/- 0.004
[Fri Dec 23 21:50:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:16 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:50:16 2011] Source does appear to be extended
[Fri Dec 23 21:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 63
[Sun Dec 25 02:57:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 21.95"
[Sun Dec 25 02:57:50 2011] source mask rpix=5.0, npix_max = 123, mask sum = 132, frac = 1.073
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 87 for pass 1, mean size = 21.95"
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87.ximg exists
[Mon Dec 26 10:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87.csv
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87_1.ximg exists
[Mon Dec 26 10:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87.csv
[Mon Dec 26 10:48:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:17 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Mon Dec 26 10:48:17 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Mon Dec 26 10:48:17 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Mon Dec 26 10:50:13 2011] Source 57 is offset by -2.819538 and 0.346943 pixels which is larger than
2 X fitted extent = 1.222423 x 1.222423, not incorporating fit results
[Mon Dec 26 10:50:14 2011] Warning, spatial fit 87 centroid is now closest to src. 70
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:13 2011] XMMSAS src. selection expression = ellipse(34922.008200, 32413.492000, 1316.964038, 1316.964038, 0.000000, X, Y)
[Tue Dec 27 03:26:13 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57_src.reg
[Tue Dec 27 03:26:13 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (326, 297) - (478, 449)
[Tue Dec 27 03:26:13 2011] XMMSAS bgd. selection expression = annulus(34922.008200, 32413.492000, 2194.940063, 4389.880126, X, Y) && !ellipse(31179.860000, 34196.614000, 1724.416050, 449.452813, 3.901000, X, Y) && !ellipse(34364.306458, 31441.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34180.339478, 27229.443573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.758972, 32146.815369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35035.692000, 30824.822000, 1729.760050, 346.068010, 358.363000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(31584.214661, 34679.681458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31052.924713, 34685.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.848236, 31972.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35420.525200, 27214.815400, 1494.912043, 804.768023, 0.000000, X, Y) && !ellipse(35753.144318, 30755.351685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.746704, 30851.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33013.228424, 34082.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.948000, 35038.343000, 738.255221, 738.255221, 0.000000, X, Y) && !ellipse(35127.425598, 31188.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) && !ellipse(34006.055389, 34005.901398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.333282, 32123.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.739899, 32859.019012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35909.363586, 28061.792603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.284088, 28818.847656, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:13 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57.gif
[Tue Dec 27 09:19:53 2011] Mean detx,y = (-7548.00, 5216.14) 
[Tue Dec 27 09:19:58 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 09:21:30 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 09:21:31 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Dec 27 09:21:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Dec 27 20:55:22 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:22 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Dec 27 20:55:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:33 2011] Using photon index=1.80, rate=0.0326, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src57.arf
[Tue Dec 27 20:55:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:33 2011] Updating source flux to 5.9e-13
[Tue Dec 27 21:06:12 2011] Flag b found in src. 57 procflags, skipping spectral fitting
[Tue Dec 27 21:06:12 2011] Flag c found in src. 57 procflags, skipping spectral fitting