[Wed Dec 21 22:44:30 2011] Detection parameters:
  Position = (358.7, 394.1) = 5 34 17.71 22 6 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 844.9 +/- 38.0
  Background counts = 469.3
  Rate = 0.07 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 8.20'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 10.53"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.616
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.53"
[Fri Dec 23 21:48:53 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Dec 23 21:48:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9.csv
[Fri Dec 23 21:48:53 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9.csv
[Fri Dec 23 21:48:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Dec 23 21:48:56 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 9 centroid is now closest to src. 44
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 44
[Fri Dec 23 21:50:16 2011] Source is confused with source 43
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.616
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 10.53"
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9.csv
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9.csv
[Mon Dec 26 10:48:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Dec 26 10:48:12 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Dec 26 10:50:13 2011] Warning, spatial fit 9 centroid is now closest to src. 52
[Mon Dec 26 10:50:14 2011] Spatial fit model total counts = 8687.970000, observed total counts = 8669.000000
[Mon Dec 26 10:50:14 2011] Offset between fit and detection position for source 50 = 0.505991 pixels
[Mon Dec 26 10:50:14 2011] Warning, changing simple spatial fit ID from 9 to 66
[Mon Dec 26 10:50:14 2011] 8250.803000 total counts/ 7439.630000 bgd. counts: snr = 9.404546
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.505991 pixels
  Position = (358.9, 393.6) = 5 34 17.64 22 6 25.9
  Extent = 21.6 (21.0-43.1)" x 5.6 (5.0-6.2)", rotation angle = 4 (1-7) degrees
  Source counts = 811.2 +/- 90.8
  Background counts = 7439.6
  Rate = 0.04 +/- 0.004
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.39
[Mon Dec 26 10:50:14 2011] Source is asymmetric
[Tue Dec 27 03:25:58 2011] XMMSAS src. selection expression = ellipse(31179.860000, 34196.614000, 1293.312037, 337.089610, 3.901000, X, Y)
[Tue Dec 27 03:25:58 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50_src.reg
[Tue Dec 27 03:25:58 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (285, 319) - (433, 468)
[Tue Dec 27 03:25:58 2011] XMMSAS bgd. selection expression = annulus(31179.860000, 34196.614000, 2155.520062, 4311.040124, X, Y) && !ellipse(28060.988000, 34262.508000, 641.057618, 641.057618, 0.000000, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.246000, 35049.256000, 761.394422, 297.811209, 90.253000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(27224.714000, 35040.103200, 492.736814, 492.736814, 0.000000, X, Y) && !ellipse(28055.790000, 39907.606000, 1545.080044, 286.207208, 270.650000, X, Y) && !ellipse(34364.306458, 31441.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(28534.191345, 34862.777588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(25897.304000, 34321.541400, 1338.480039, 1338.480039, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29565.056915, 34800.461395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.758972, 32146.815369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35035.692000, 30824.822000, 1729.760050, 346.068010, 358.363000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.144043, 39188.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(31584.214661, 34679.681458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31052.924713, 34685.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34990.848236, 31972.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35753.144318, 30755.351685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.746704, 30851.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33013.228424, 34082.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34922.008200, 32413.492000, 1755.952051, 1755.952051, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.948000, 35038.343000, 738.255221, 738.255221, 0.000000, X, Y) && !ellipse(35127.425598, 31188.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) && !ellipse(34006.055389, 34005.901398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.333282, 32123.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.739899, 32859.019012, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:25:58 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50.gif
[Tue Dec 27 03:45:34 2011] Mean detx,y = (-3575.65, 6943.08) 
[Tue Dec 27 03:45:38 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 03:46:30 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 03:46:31 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Dec 27 03:46:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Dec 27 20:55:12 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:12 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Dec 27 20:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:27 2011] Using photon index=1.80, rate=0.0399, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src50.arf
[Tue Dec 27 20:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:27 2011] Updating source flux to 8.1e-13
[Tue Dec 27 21:06:12 2011] Flag c found in src. 50 procflags, skipping spectral fitting