[Wed Dec 21 22:44:29 2011] Detection parameters: Position = (328.5, 401.3) = 5 34 27.16 22 6 53.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 687.0 +/- 71.5 Background counts = 468.3 Rate = 0.06 +/- 0.006 [Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 7.77' [Thu Dec 22 17:52:01 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 10.31" [Thu Dec 22 17:52:01 2011] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.667 [Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 10.31" [Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25.ximg exists [Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25.csv [Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25_1.ximg exists [Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25.csv [Fri Dec 23 21:48:54 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Fri Dec 23 21:50:14 2011] Source 41 is offset by -1.254927 and -6.512556 pixels which is larger than 2 X fitted extent = 1.161453 x 1.161453, not incorporating fit results [Fri Dec 23 21:50:15 2011] Warning, spatial fit 25 centroid is now closest to src. 2 [Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000 [Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 23 21:50:15 2011] Assessing source extent using major [Fri Dec 23 21:50:15 2011] Source does appear to be extended [Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 23 21:50:16 2011] Source is confused with source 46 [Sun Dec 25 02:57:50 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting [Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 10.31" [Sun Dec 25 02:57:50 2011] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.667 [Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 10.31" [Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src24.ximg exists [Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src24_1.ximg exists [Mon Dec 26 10:48:09 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src24 appears to have run properly [Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Mon Dec 26 10:48:13 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Mon Dec 26 10:50:13 2011] Source 41 is offset by -1.831801 and -1.089430 pixels which is larger than 2 X fitted extent = 0.921062 x 0.921062, not incorporating fit results [Mon Dec 26 10:50:13 2011] Warning, spatial fit 24 centroid is now closest to src. 40 [Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000 [Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 26 10:50:14 2011] Assessing source extent using major [Mon Dec 26 10:50:14 2011] Source does appear to be extended [Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Dec 27 03:26:00 2011] XMMSAS src. selection expression = ellipse(28534.191345, 34862.777588, 652.500000, 652.500000, 0.000000, X, Y) [Tue Dec 27 03:26:00 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41_src.reg [Tue Dec 27 03:26:00 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (291, 364) - (366, 439) [Tue Dec 27 03:26:00 2011] XMMSAS bgd. selection expression = annulus(28534.191345, 34862.777588, 1087.500000, 2175.000000, X, Y) && !ellipse(28060.988000, 34262.508000, 641.057618, 641.057618, 0.000000, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.246000, 35049.256000, 761.394422, 297.811209, 90.253000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(31179.860000, 34196.614000, 1724.416050, 449.452813, 3.901000, X, Y) && !ellipse(27224.714000, 35040.103200, 492.736814, 492.736814, 0.000000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(25897.304000, 34321.541400, 1338.480039, 1338.480039, 0.000000, X, Y) && !ellipse(26171.324000, 35080.806800, 478.411214, 478.411214, 0.000000, X, Y) && !ellipse(29565.056915, 34800.461395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(24852.987200, 34372.190000, 1603.640046, 1603.640046, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(31052.924713, 34685.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.569397, 35185.368958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.948000, 35038.343000, 738.255221, 738.255221, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) [Tue Dec 27 03:26:00 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41.gif [Tue Dec 27 04:58:15 2011] Mean detx,y = (-863.71, 7413.48) [Tue Dec 27 04:58:19 2011] Setting backscal keywords in source and bgd. spectrum [Tue Dec 27 04:58:46 2011] Binned source spectrum to 10 counts/bin [Tue Dec 27 04:58:47 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Tue Dec 27 04:58:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41_bgd.pi.gz [Tue Dec 27 13:52:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Dec 27 13:52:54 2011] rmf not generated due to insufficient counts [Tue Dec 27 20:55:14 2011] Updating aperture counts using extracted products [Tue Dec 27 20:55:14 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Tue Dec 27 20:55:28 2011] Calculating source flux in energy range 0.30-8.00 [Tue Dec 27 20:55:28 2011] Using photon index=1.80, rate=0.0604, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src41.arf [Tue Dec 27 20:55:28 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Dec 27 20:55:28 2011] Updating source flux to 1.1e-12 [Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting