[Wed Dec 21 22:44:27 2011] Detection parameters: Position = (323.5, 460.1) = 5 34 28.74 22 11 15.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1353.2 +/- 51.6 Background counts = 188.1 Rate = 0.07 +/- 0.003 [Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 11.86' [Thu Dec 22 17:52:01 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting [Thu Dec 22 17:52:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 12.36" [Thu Dec 22 17:52:01 2011] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.873 [Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 12.36" [Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16.ximg exists [Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16.csv [Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16_1.ximg exists [Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16.csv [Fri Dec 23 21:48:54 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Fri Dec 23 21:48:56 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly [Fri Dec 23 21:50:15 2011] Warning, spatial fit 16 centroid is now closest to src. 6 [Fri Dec 23 21:50:15 2011] Source 3 is offset by -5.545707 and 6.100395 pixels which is larger than 2 X fitted extent = 1.437701 x 1.437701, not incorporating fit results [Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000 [Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 23 21:50:15 2011] Assessing source extent using major [Fri Dec 23 21:50:15 2011] Source does appear to be extended [Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 23 21:50:16 2011] Source is confused with source 22 [Sun Dec 25 02:57:50 2011] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting [Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 12.36" [Sun Dec 25 02:57:50 2011] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.873 [Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 12.36" [Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src15.ximg exists [Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src15_1.ximg exists [Mon Dec 26 10:48:09 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src15 appears to have run properly [Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Mon Dec 26 10:48:12 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Mon Dec 26 10:50:13 2011] Warning, spatial fit 15 centroid is now closest to src. 9 [Mon Dec 26 10:50:14 2011] Spatial fit model total counts = 6138.880000, observed total counts = 6144.000000 [Mon Dec 26 10:50:14 2011] Offset between fit and detection position for source 3 = 0.932211 pixels [Mon Dec 26 10:50:14 2011] Warning, changing simple spatial fit ID from 15 to 54 [Mon Dec 26 10:50:14 2011] 6326.081000 total counts/ 6011.850000 bgd. counts: snr = 4.052705 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.932211 pixels Position = (323.0, 459.3) = 5 34 28.88 22 11 11.5 Extent = 19.3 (10.1-25.0)" x 3.6 (3.1-4.2)", rotation angle = 271 (266-279) degrees Source counts = 314.2 +/- 79.5 Background counts = 6011.9 Rate = 0.02 +/- 0.004 [Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000 [Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound [Mon Dec 26 10:50:14 2011] Source does appear to be extended [Mon Dec 26 10:50:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.41 [Mon Dec 26 10:50:14 2011] Source is asymmetric [Tue Dec 27 03:25:59 2011] XMMSAS src. selection expression = ellipse(28055.790000, 39907.606000, 1158.810033, 214.655406, 270.650000, X, Y) [Tue Dec 27 03:25:59 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3_src.reg [Tue Dec 27 03:25:59 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (256, 393) - (390, 526) [Tue Dec 27 03:25:59 2011] XMMSAS bgd. selection expression = annulus(28055.790000, 39907.606000, 1931.350056, 3862.700111, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(28160.089752, 41272.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(28393.081400, 42215.439800, 880.928025, 880.928025, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.196777, 43359.189941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.181213, 42745.012634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(27616.886688, 40406.571686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.144043, 39188.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(27813.701355, 41441.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.609253, 43990.279785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.419586, 43007.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.574677, 43530.611908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.370000, 43845.144000, 2209.696064, 2209.696064, 0.000000, X, Y) && !ellipse(25709.569397, 35185.368958, 870.000000, 870.000000, 0.000000, X, Y) [Tue Dec 27 03:25:59 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3.gif [Tue Dec 27 04:13:20 2011] Mean detx,y = (-177.06, 12422.32) [Tue Dec 27 04:13:24 2011] Setting backscal keywords in source and bgd. spectrum [Tue Dec 27 04:14:07 2011] Binned source spectrum to 10 counts/bin [Tue Dec 27 04:14:08 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue Dec 27 04:14:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3_bgd.pi.gz [Tue Dec 27 20:55:13 2011] Updating aperture counts using extracted products [Tue Dec 27 20:55:13 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Tue Dec 27 20:55:27 2011] Calculating source flux in energy range 0.30-8.00 [Tue Dec 27 20:55:27 2011] Using photon index=1.80, rate=0.0154, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src3.arf [Tue Dec 27 20:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Dec 27 20:55:27 2011] Updating source flux to 5.1e-13 [Tue Dec 27 21:06:12 2011] Flag b found in src. 3 procflags, skipping spectral fitting [Tue Dec 27 21:06:12 2011] Flag c found in src. 3 procflags, skipping spectral fitting