[Wed Dec 21 22:44:29 2011] Detection parameters:
  Position = (310.9, 432.4) = 5 34 32.68 22 9 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.9 +/- 35.0
  Background counts = 374.1
  Rate = 0.02 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 9.76'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.093
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 99 for pass 0, mean size = 11.31"
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99.ximg exists
[Fri Dec 23 21:48:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99.csv
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99_1.ximg exists
[Fri Dec 23 21:48:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99.csv
[Fri Dec 23 21:48:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Fri Dec 23 21:48:59 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Fri Dec 23 21:50:15 2011] Source 26 is offset by 4.416785 and -8.018151 pixels which is larger than
2 X fitted extent = 1.379784 x 1.379784, not incorporating fit results
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 99 centroid is now closest to src. 9
[Fri Dec 23 21:50:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:16 2011] Assessing source extent using major
[Fri Dec 23 21:50:16 2011] Source does appear to be extended
[Fri Dec 23 21:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 27
[Fri Dec 23 21:50:16 2011] Source is confused with source 24
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 11.31"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.093
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 88 for pass 1, mean size = 11.31"
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src88.ximg exists
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src88_1.ximg exists
[Mon Dec 26 10:48:11 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src88 appears to have run properly
[Mon Dec 26 10:48:17 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Mon Dec 26 10:48:17 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Mon Dec 26 10:48:17 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src88 appears to have run properly
[Mon Dec 26 10:50:14 2011] Warning, spatial fit 88 centroid is now closest to src. 27
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:13 2011] XMMSAS src. selection expression = ellipse(26997.930328, 37574.090851, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:13 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26_src.reg
[Tue Dec 27 03:26:13 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (273, 395) - (348, 470)
[Tue Dec 27 03:26:13 2011] XMMSAS bgd. selection expression = annulus(26997.930328, 37574.090851, 1087.500000, 2175.000000, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.246000, 35049.256000, 761.394422, 297.811209, 90.253000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(27224.714000, 35040.103200, 492.736814, 492.736814, 0.000000, X, Y) && !ellipse(23885.978400, 34445.685800, 1110.024032, 1110.024032, 0.000000, X, Y) && !ellipse(28055.790000, 39907.606000, 1545.080044, 286.207208, 270.650000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(28534.191345, 34862.777588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(25897.304000, 34321.541400, 1338.480039, 1338.480039, 0.000000, X, Y) && !ellipse(26171.324000, 35080.806800, 478.411214, 478.411214, 0.000000, X, Y) && !ellipse(29565.056915, 34800.461395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(24852.987200, 34372.190000, 1603.640046, 1603.640046, 0.000000, X, Y) && !ellipse(27616.886688, 40406.571686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.144043, 39188.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(25709.569397, 35185.368958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.948000, 35038.343000, 738.255221, 738.255221, 0.000000, X, Y)
[Tue Dec 27 03:26:13 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26.gif
[Tue Dec 27 09:22:55 2011] Mean detx,y = (679.35, 10050.13) 
[Tue Dec 27 09:23:00 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 09:23:22 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 09:23:23 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Dec 27 09:23:23 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Dec 27 19:47:18 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 19:47:18 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:22 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:22 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Dec 27 20:55:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:33 2011] Using photon index=1.80, rate=0.0194, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src26.arf
[Tue Dec 27 20:55:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:33 2011] Updating source flux to 4.5e-13
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting