[Wed Dec 21 22:44:28 2011] Detection parameters:
  Position = (318.0, 451.0) = 5 34 30.46 22 10 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 621.1 +/- 44.2
  Background counts = 259.2
  Rate = 0.03 +/- 0.002

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 11.15'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 12.00"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 66 for pass 0, mean size = 12.00"
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66.csv
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66_1.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66.csv
[Fri Dec 23 21:48:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Fri Dec 23 21:48:58 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 66 centroid is now closest to src. 26
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 9
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 12.00"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 12.00"
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src61.ximg exists
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon Dec 26 10:48:11 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src61 appears to have run properly
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon Dec 26 10:48:14 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon Dec 26 10:50:14 2011] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.789879 pixels away
[Mon Dec 26 10:50:14 2011] Warning, spatial fit 61 centroid is now closest to src. 22
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:06 2011] XMMSAS src. selection expression = ellipse(27614.144043, 39188.550446, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:06 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23_src.reg
[Tue Dec 27 03:26:06 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (280, 414) - (355, 489)
[Tue Dec 27 03:26:06 2011] XMMSAS bgd. selection expression = annulus(27614.144043, 39188.550446, 1087.500000, 2175.000000, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(28055.790000, 39907.606000, 1545.080044, 286.207208, 270.650000, X, Y) && !ellipse(28160.089752, 41272.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(28393.081400, 42215.439800, 880.928025, 880.928025, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(27616.886688, 40406.571686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(27813.701355, 41441.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:06 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23.gif
[Tue Dec 27 07:29:42 2011] Mean detx,y = (204.94, 11683.79) 
[Tue Dec 27 07:29:46 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 07:30:15 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 07:30:15 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Dec 27 07:30:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Dec 27 17:33:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 17:33:16 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:18 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:18 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Dec 27 20:55:31 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:31 2011] Using photon index=1.80, rate=0.0305, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src23.arf
[Tue Dec 27 20:55:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:31 2011] Updating source flux to 1.9e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting