[Wed Dec 21 22:44:28 2011] Detection parameters:
  Position = (318.0, 465.0) = 5 34 30.45 22 11 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 730.0 +/- 42.4
  Background counts = 205.6
  Rate = 0.04 +/- 0.002

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 12.16'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 12.51"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.790
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 12.51"
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59.csv
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Dec 23 21:48:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59.csv
[Fri Dec 23 21:48:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Dec 23 21:48:58 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Dec 23 21:48:58 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Fri Dec 23 21:50:15 2011] Source 22 is offset by 5.357157 and 0.365031 pixels which is larger than
2 X fitted extent = 1.420529 x 11.364230, not incorporating fit results
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 59 centroid is now closest to src. 3
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 3
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 12.51"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.790
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 54 for pass 1, mean size = 12.51"
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src54.ximg exists
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Dec 26 10:48:10 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src54 appears to have run properly
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Dec 26 10:48:14 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Dec 26 10:48:14 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Dec 26 10:50:14 2011] Warning, spatial fit 54 centroid is now closest to src. 3
[Mon Dec 26 10:50:14 2011] Source 22 is offset by -4.941119 and 2.465881 pixels which is larger than
2 X fitted extent = 1.650621 x 1.650621, not incorporating fit results
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:04 2011] XMMSAS src. selection expression = ellipse(27616.886688, 40406.571686, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:04 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22_src.reg
[Tue Dec 27 03:26:04 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (280, 428) - (355, 503)
[Tue Dec 27 03:26:04 2011] XMMSAS bgd. selection expression = annulus(27616.886688, 40406.571686, 1087.500000, 2175.000000, X, Y) && !ellipse(28055.790000, 39907.606000, 1545.080044, 286.207208, 270.650000, X, Y) && !ellipse(28160.089752, 41272.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(28393.081400, 42215.439800, 880.928025, 880.928025, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.196777, 43359.189941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.181213, 42745.012634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.144043, 39188.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(27813.701355, 41441.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.419586, 43007.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.370000, 43845.144000, 2209.696064, 2209.696064, 0.000000, X, Y)
[Tue Dec 27 03:26:04 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22.gif
[Tue Dec 27 07:09:37 2011] Mean detx,y = (249.86, 12943.27) 
[Tue Dec 27 07:09:41 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 07:10:14 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 07:10:14 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Dec 27 07:10:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Dec 27 17:08:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 17:08:02 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:17 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:17 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Dec 27 20:55:30 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:30 2011] Using photon index=1.80, rate=0.0359, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src22.arf
[Tue Dec 27 20:55:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:30 2011] Updating source flux to 1.5e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting