[Wed Dec 21 22:44:34 2011] Detection parameters:
  Position = (326.9, 506.2) = 5 34 27.66 22 14 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 464.0 +/- 36.7
  Background counts = 124.8
  Rate = 0.02 +/- 0.002

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 15.20'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 14.03"
[Thu Dec 22 17:52:01 2011] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.955
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 14.03"
[Fri Dec 23 21:48:55 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86.ximg exists
[Fri Dec 23 21:48:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86.csv
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86_1.ximg exists
[Fri Dec 23 21:48:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86.csv
[Fri Dec 23 21:48:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Fri Dec 23 21:48:59 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Fri Dec 23 21:48:59 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Fri Dec 23 21:50:15 2011] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 155 at 11.087866 pixels away
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 86 centroid is now closest to src. 19
[Fri Dec 23 21:50:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:16 2011] Assessing source extent using major
[Fri Dec 23 21:50:16 2011] Source does appear to be extended
[Fri Dec 23 21:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 16
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 14.03"
[Sun Dec 25 02:57:50 2011] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.955
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 14.03"
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77.ximg exists
[Mon Dec 26 10:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77.csv
[Mon Dec 26 10:48:11 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77_1.ximg exists
[Mon Dec 26 10:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77.csv
[Mon Dec 26 10:48:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:15 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Mon Dec 26 10:48:15 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Mon Dec 26 10:48:16 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Mon Dec 26 10:50:14 2011] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 155 at 18.179956 pixels away
[Mon Dec 26 10:50:14 2011] Source 155 is offset by -5.090261 and -1.806692 pixels which is larger than
2 X fitted extent = 1.562446 x 1.562446, not incorporating fit results
[Mon Dec 26 10:50:14 2011] Source 155 is offset by -5.290101 and 2.637906 pixels which is larger than
2 X fitted extent = 1.587425 x 1.587425, not incorporating fit results
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:11 2011] XMMSAS src. selection expression = ellipse(28392.609253, 43990.279785, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 03:26:11 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155_src.reg
[Tue Dec 27 03:26:11 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (289, 469) - (364, 544)
[Tue Dec 27 03:26:11 2011] XMMSAS bgd. selection expression = annulus(28392.609253, 43990.279785, 1087.500000, 2175.000000, X, Y) && !ellipse(28160.089752, 41272.371429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.081400, 42215.439800, 880.928025, 880.928025, 0.000000, X, Y) && !ellipse(28391.196777, 43359.189941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.181213, 42745.012634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.701355, 41441.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.419586, 43007.926910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.574677, 43530.611908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27216.370000, 43845.144000, 2209.696064, 2209.696064, 0.000000, X, Y)
[Tue Dec 27 03:26:11 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155.gif
[Tue Dec 27 08:59:21 2011] Mean detx,y = (-260.87, 16378.89) 
[Tue Dec 27 08:59:25 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 08:59:52 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 08:59:53 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155_src_b10.pi.gz
[Tue Dec 27 08:59:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155_bgd.pi.gz
[Tue Dec 27 19:13:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 19:13:13 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:20 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:20 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155_src_b10.pi.gz
[Tue Dec 27 20:55:32 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:32 2011] Using photon index=1.80, rate=0.0228, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src155.arf
[Tue Dec 27 20:55:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:32 2011] Updating source flux to 1e-12
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting