[Wed Dec 21 22:44:33 2011] Detection parameters:
  Position = (320.5, 224.0) = 5 34 29.69 21 54 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 616.0 +/- 43.3
  Background counts = 639.4
  Rate = 0.05 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 5.63'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.907
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 9.24"
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43.csv
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43.csv
[Fri Dec 23 21:48:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Dec 23 21:48:57 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Dec 23 21:48:57 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Dec 23 21:50:15 2011] Source 128 is offset by 1.582541 and 2.403664 pixels which is larger than
2 X fitted extent = 8.875540 x 1.112961, not incorporating fit results
[Fri Dec 23 21:50:15 2011] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 128 at 10.342194 pixels away
[Fri Dec 23 21:50:15 2011] Warning, spatial fit 43 centroid is now closest to src. 125
[Fri Dec 23 21:50:15 2011] Source 128 is offset by -1.275225 and -6.090888 pixels which is larger than
2 X fitted extent = 8.618713 x 1.144818, not incorporating fit results
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 125
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.907
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 9.24"
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src40.ximg exists
[Mon Dec 26 10:48:10 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src40_1.ximg exists
[Mon Dec 26 10:48:10 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src40 appears to have run properly
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Mon Dec 26 10:48:13 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Mon Dec 26 10:48:13 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Mon Dec 26 10:50:13 2011] Warning, spatial fit 40 centroid is now closest to src. 125
[Mon Dec 26 10:50:13 2011] Spatial fit model total counts = 7158.850000, observed total counts = 7156.000000
[Mon Dec 26 10:50:13 2011] Offset between fit and detection position for source 128 = 4.576324 pixels
[Mon Dec 26 10:50:13 2011] Warning, changing simple spatial fit ID from 40 to 43
[Mon Dec 26 10:50:13 2011] 6418.911000 total counts/ 5999.250000 bgd. counts: snr = 5.418139
Spatial fit parameters:
  Offset between fit and detection position for source 128 = 4.576324 pixels
  Position = (315.9, 223.8) = 5 34 31.12 21 54 7.1
  Extent = 11.8 (10.0-14.1)", rotation angle = 0
  Source counts = 419.7 +/- 80.1
  Background counts = 5999.2
  Rate = 0.02 +/- 0.004
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:26:03 2011] XMMSAS src. selection expression = ellipse(27435.132000, 19419.308000, 710.202020, 710.202020, 0.000000, X, Y)
[Tue Dec 27 03:26:03 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128_src.reg
[Tue Dec 27 03:26:03 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (275, 183) - (357, 265)
[Tue Dec 27 03:26:03 2011] XMMSAS bgd. selection expression = annulus(27435.132000, 19419.308000, 1183.670034, 2367.340068, X, Y) && !ellipse(26870.573883, 18975.152634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.046143, 18413.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.960000, 19294.006000, 644.092019, 644.092019, 0.000000, X, Y) && !ellipse(26198.306000, 20164.616000, 1457.560042, 1457.560042, 0.000000, X, Y) && !ellipse(27216.371400, 19250.698000, 885.784025, 885.784025, 0.000000, X, Y) && !ellipse(26518.928200, 20135.732000, 1439.216041, 458.715213, 90.000000, X, Y) && !ellipse(28745.128113, 18770.744583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.945800, 20299.428240, 1229.272035, 1229.272035, 0.000000, X, Y) && !ellipse(29122.598000, 20147.960600, 1493.928043, 1493.928043, 0.000000, X, Y) && !ellipse(27638.550000, 20273.034000, 1247.472036, 1247.472036, 0.000000, X, Y) && !ellipse(28687.644000, 20151.524400, 2507.120072, 2507.120072, 0.000000, X, Y) && !ellipse(27115.755219, 18557.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.840607, 18971.423645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.581665, 20392.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25091.438000, 20046.721400, 1436.352041, 1436.352041, 0.000000, X, Y) && !ellipse(25894.356781, 19480.712692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.662000, 20546.942000, 1401.056040, 450.631213, 187.374000, X, Y) && !ellipse(28567.564600, 19600.942000, 1540.880044, 1540.880044, 0.000000, X, Y) && !ellipse(23728.906000, 20473.869120, 1423.624041, 1423.624041, 0.000000, X, Y) && !ellipse(29517.738983, 19354.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29540.821623, 20230.410588, 1493.928043, 717.637621, 0.000000, X, Y) && !ellipse(26793.455902, 16588.273331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26209.234000, 18402.786000, 889.192026, 889.192026, 0.000000, X, Y) && !ellipse(27096.341644, 17008.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.184000, 18249.460000, 1544.344044, 1544.344044, 0.000000, X, Y) && !ellipse(27931.207642, 17798.443649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.921570, 19487.074142, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:03 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128.gif
[Tue Dec 27 06:11:28 2011] Mean detx,y = (-702.12, -7984.17) 
[Tue Dec 27 06:11:32 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:11:57 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:11:57 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Tue Dec 27 06:11:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128_bgd.pi.gz
[Tue Dec 27 20:55:16 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:16 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Tue Dec 27 20:55:29 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:29 2011] Using photon index=1.80, rate=0.0206, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src128.arf
[Tue Dec 27 20:55:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:29 2011] Updating source flux to 3.3e-13
[Tue Dec 27 21:06:12 2011] Flag b found in src. 128 procflags, skipping spectral fitting
[Tue Dec 27 21:06:12 2011] Flag c found in src. 128 procflags, skipping spectral fitting